Orange Button BIM

Firestop clash detection, right in your browser.

BIM Online is the browser edition of Orange Button BIM. Import your IFC models, check them, find every firestop clash, measure the distances and send a complete clashlist to Orange Button Office. No Revit and no BIM experience required.

Intro: what BIM Online makes · Video tour · BIM Online →
  • No Revit needed

    Everything runs in the browser, so firestop specialists without BIM software can start right away.

  • Checked before you clash

    A traffic-light checklist shows what information the models are missing, before you count a single clash.

  • Straight to Office

    Upload the floor plans and the clashlist to Orange Button Office, where every clash gets a certified solution.

Try it yourself

Click through a demo of BIM Online.

A simplified demo with one small sample project and two IFC models: check the data, run the clash detection and measure the distances, in five steps, in your browser, without an account. Want to try all the features? Register now for free!

BIM Online: try it yourself

On a phone the demo opens full screen, in landscape. Close it at the top right.

Builders work openings

Clash against builders work openings, not just walls and floors.

On many projects, and on almost every project in the UK, the openings for services are builders work in connection (BWIC): holes, sleeves and voids formed before the services go in. Orange Button BIM clashes against those openings and automatically identifies and analyses every penetration that passes through them.

  • 1Openings as a clash categoryBuilders work openings in the model, as void or opening elements, take part in clash detection next to walls, floors and fire-rated plates.
  • 2Every penetration identifiedEvery pipe, duct and cable tray through an opening is found automatically and linked to that opening.
  • 3Analysed against tested systemsOpening size and shape, the distance from each service to the edge of the opening and the space between services are checked against the rules of the tested systems.
  • 4One opening, one MSPAn opening with two or more services becomes a multi-service penetration automatically, sized to the opening and numbered in the clashlist.

In BIM Online with your IFC models, and in Revit with the OneClick app Apertures.

Watch: Engineering, distances and MSPs
Builders work openingBC3 services: 1 MSPB: to the edgeC: between services

Video tour · BIM Online

From IFC files to a complete clashlist.

Twelve short videos: import and check your models, find and review every clash, measure the distances, send the result to Orange Button Office, and work with BWIC openings.

12 videos · 21 min

01Intro: what BIM Online makes

Read the transcript

01 Intro: what BIM Online makes

Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.

A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.

BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.

BIM Online

Short videos per panel

One short video for every panel in BIM Online, plus a preview of the Compliance Checker.

What BIM Online does

  1. 01

    Import and prepare your models

    Drop in all your IFC files at once. BIM Online reads each file’s discipline from its name, so a fire-rating advice model is treated as information, not as walls.

    • Architectural, structural and MEP models together
    • Crop project to hide stray elements far from the building
    • X-ray, section box and category filter to look inside
  2. 02

    The information a firestop needs

    Every element carries its Orange Button parameters: construction type and thickness, fire rating, and installation type and size. BIM Online fills in what it can from the IFC; you complete the rest.

    • Missing values shown at a glance
    • Types picked from a list, sizes in millimetres
    • Original IFC properties kept read-only
  3. 03

    The Checklist

    Before you look for clashes, every wall, floor and installation gets a traffic light. Send the checklist to the modeller as a PDF; when the improved models come back, it updates by itself.

    • Green complete, orange worth a look, red missing
    • PDF per file and category
    • Fill in missing values yourself
  4. 04

    Clash detection by rules

    Clashes are found from fixed rules for walls, floors and builders work openings, and numbered per floor plan. A pipe through a wall of three layers is one clash, not three.

    • Building storeys and floor plans from your IFC
    • Run again after model changes: update keeps your checks
    • Approve or remove each clash, or place one by hand
  5. 05

    Complete it in bulk

    The Data Manager shows the Clashlist exactly as it goes to Office. Group, filter and fill in a whole group at once, then number your clashes and MSPs.

    • Red cells show missing information
    • Fill in a group, every clash follows
    • Numbering per level, with your own prefix
  6. 06

    Engineering and the Compliance Checker

    Firestop products need space. Engineering measures every wall and floor with penetrations against the distances you set, and helps you solve what doesn’t fit.

    • A between penetrations, B to the edge of the opening, C inside one opening
    • Combine penetrations into an MSP, or move them apart
    • Engineering report: a plan per level and a sheet per wall
  7. 07

    To Office, and back to BIM

    Save drafts while you work and publish a version when it’s ready. Upload the floor plans and the clashlist to Orange Button Office, or export the clashes as IFC.

    • A warning before you upload incomplete clashes
    • IFC export to re-import in your BIM software
    • A video guide in most panels

New · Compliance Checker

Every A, B and C distance, checked automatically.

The Compliance Checker in OB BIM checks all distances between installations and openings in your project. In BIM Online you find it under Engineering. It flags every violation, helps you solve it and produces a report you can share.

  • A
    Between installationsMinimum distance between elements, per element type and construction category.
  • B
    To the edge of the openingMinimum distance from each element to the edge of an opening or multi-service penetration.
  • C
    Inside one openingMinimum distance between element types within a single opening or MSP.

Set your own distance tables per firestop solution, run the check on all clashes, and export the violations per construction as a PDF.Watch the preview →

Also available

Prefer to work in Revit?

The Revit Edition brings the same clash engine into Autodesk Revit, together with OneClick apps that take the repetitive work out of firestop modelling.

  • AperturesCheck and create openings for every service in one go.
  • Multi-service penetrationsGroup services into one opening according to tested rules.
  • NumberingNumber every firestop location consistently.
  • BatchLinkLink a batch of models at once.
OneClick app Apertures in Revit

Revit Edition

Videos for the Revit Edition

Install the plugin, link your models and find the firestop clashes in Autodesk Revit, and the OneClick apps that take the repetitive work out of it.

Questions

What is a firestop clash?

A firestop clash is a place where a service, such as a pipe, duct or cable tray, passes through a fire-rated wall or floor. Each of those openings needs a tested penetration seal: a certified firestop solution.

Can Orange Button clash against builders work openings?

Yes. Builders work openings (BWIC) in the model take part in clash detection. Every penetration through an opening is identified automatically and analysed against the tested systems: opening size and shape, distance to the edge and between services. An opening with two or more services becomes one multi-service penetration (MSP).

How are clashes counted?

Each unique clash position counts as one clash. The first 200 each month are free; above that the price per clash drops as your volume grows.

Do I need Autodesk Revit?

No. BIM Online runs entirely in your browser. The Revit Edition is there for teams that already model in Revit and want the OneClick apps.

Push the button.

Certified firestop by design. Find your first firestop clashes today, free up to 200 a month.