Most asked questions

Firestop software questions, answered directly.

For firestop specialists, contractors and manufacturers. Can’t find your question? Ask us →

About Orange Button

What is passive fire protection, and how does BIM help?

Passive fire protection keeps a fire inside the compartment where it starts, with fire-rated walls and floors and a firestop seal around every service that passes through them. Orange Button designs those seals in your BIM model, with tested systems from manufacturers, before anything is built.

What is Orange Button?

Orange Button is firestop software that automates the design of penetration seals in BIM. It finds every penetration in your model, selects a tested firestop system for each one and records the installation on site. The platform has three products, OB BIM, OB Office and OB Field, and two offerings for manufacturers: OB Manufacturer and OB Enterprise.

Who is Orange Button for?

For firestop specialists, contractors and engineers who quote, design and install penetration seals, and for manufacturers of firestop systems who want their tested systems specified in BIM and installed as tested.

What is automated BIM design for firestop?

The rules of tested firestop systems are applied to every penetration in the BIM model: data check, clash detection, engineering, rule-based selection and placement in BIM. Same model, same rules, same result, so every choice can be traced back to a tested system.

Why take fire safety into the design?

Because a seal is only certified when everything around it matches the test: the wall build-up, the supports of the services and the size of the opening. On site those are already fixed. In the design you can still align them at product level, so the drywall builder, the installer and the firestop contractor build to the same plan and a certified system can be installed. It raises the quality of the seals and lowers the total cost.

How much time does it save?

Up to 90% of firestop design time. Quotations and designs are up to ten times faster, because the solution for every penetration is selected automatically instead of looked up in approvals and drawings by hand.

In which countries can I use Orange Button?

Orange Button is used in 8 countries. You choose the manufacturers for your country and technical standards, and every solution shows the countries where it is approved.

What is the difference between OB BIM, OB Office and OB Field?

OB BIM finds every penetration in your BIM model, in BIM Online in the browser or with the Revit plugin. OB Office manages your projects, selects a tested penetration seal for every penetration and produces quotes and reports. OB Field is the app your installers use on site to record, seal and photograph every penetration.

Which phases does a project go through?

Checklist, quotation, engineering, construction and maintenance. In the checklist phase you check the information, in quotation you set the design and cost, in engineering Office selects the solutions, and then come construction and maintenance. A finished project is archived.

Where can I find help?

Most panels have a video button with a short guide, and there are video tours of BIM Online, Office and the Field app on this website. In Office, click Support to contact us.

For firestop specialists and contractors

What is a firestop clash?

A place where a service, such as a pipe, duct, cable or cable tray, passes through a fire-rated wall or floor. Each unique position counts as one clash, and each one needs a tested firestop solution.

Which BIM models can I use?

IFC models from any BIM software, in BIM Online in your browser, and Autodesk Revit models with the Orange Button plugin. Architectural, structural and MEP models are combined in one project.

Do I need Autodesk Revit or BIM experience?

No. BIM Online runs in your browser and needs no Revit and no BIM experience. Teams that already model in Revit can use the Revit plugin with the OneClick apps.

Can I use Orange Button without a BIM model?

Yes. Upload PDF floor plans in OB Office, and your installers record every penetration on site with the Field app, which proposes the tested solution that fits. You get the same report as on a BIM project.

Can Orange Button clash against builders work openings?

Yes. Builders work openings (BWIC) in the model take part in clash detection. Every penetration through an opening is identified automatically and analysed against the tested systems, and an opening with two or more services becomes one multi-service penetration.

What is an MSP?

A multi-service penetration: one opening with several services passing through it, sealed as one block. Orange Button suggests MSPs where penetrations are too close together, and openings with two or more clashes become an MSP automatically.

What are the A, B and C distances?

The minimum distances in a tested system: A between penetrations, B from a penetration to the edge of the opening, and C between services inside one opening. The Compliance Checker measures them for every wall and floor in the model.

What happens if no tested solution fits?

The penetration stays without a solution, and Office shows the near misses with the property that ruled each one out, often a single measurement. You can then change the design, for example combine penetrations into an MSP or move them apart, before anything is built.

Which manufacturers can I choose from?

All manufacturers on the platform, including Promat, Soudal, AF Systems and Air Fire Tech. You choose your preferred manufacturers and star the solutions you prefer, and Orange Button only proposes tested solutions from their Field of Application.

What can I export?

The solutions per penetration to Excel, the clashes as IFC to re-import in your BIM software, the checklist as PDF, an engineering report with a plan per level and a sheet per wall, and a handover report with every firestop in the building.

Working with the platform

What is the Checklist?

Before clash detection, every wall, floor and installation in the model gets a traffic light: green is complete, orange is worth a look, red means required information is missing. Export it as a PDF for the modeller; when the improved models come back, the checklist updates by itself.

What happens when the BIM model changes?

Import the new models and run clash detection again. Update keeps what you already checked, such as marks, approvals and removed clashes, and adds what is new. Add only leaves every existing clash as it is, and Replace starts over.

Does a pipe through a wall with several layers count as several clashes?

No. BIM Online combines what belongs together: a pipe through a wall of three layers is one clash, not three. A badge shows how many elements were combined, and you can separate one if it should not be included.

Can I add or copy clashes by hand?

Yes. Place a manual clash where one is missing. On repetitive buildings, such as apartments where only one is modelled, copy its clashes and paste them in the others, rotating with R and mirroring with M.

What is the Data Manager?

The place to check and complete information in bulk. The Clashlist table shows exactly what goes to Office. Group, filter and fill in a whole group at once, store your own schedules, and number clashes and MSPs per level with your own prefix.

How does Office choose between several solutions that fit?

Office ranks them by your preferences: a starred manufacturer comes first, and within that a starred solution. Office proposes, you decide: you can always pick another solution, and identical clashes are grouped so one choice covers the whole group.

Why don’t I see every manufacturer?

Office only offers solutions that fit the countries you work in and the technical standards you use, such as a European Technical Assessment. You set these in your company settings, and then choose the manufacturers you work with.

What is in the handover report?

Every firestop in the building: the construction, the installation and the certified system with its products, with the work recorded on site. The report is built in the background and you get an e-mail when it is ready. You choose the language of your reports in the company settings.

Can I share a project with my client or the building owner?

Yes. Viewer mode creates a read-only link that shows the floor plans and the progress on site, without access to the rest of your project. In the company settings you decide what viewers may see.

Can I work with my whole team?

Yes. Invite colleagues by e-mail under Users; every employee has a role. The Office License is per user, and per project you see exactly who has access.

On site with the Field app

How does the Field app work without signal?

Before going to site, download the project with its solutions, components and images. Everything you record offline is saved on the phone. Back online, press and hold the project and tap Synchronize: the work appears in Office, and every sync is logged.

Can installers record a penetration that is not on the plan?

Yes. Tap the plus and put it on the plan; it gets the next free number. Enter the construction, its thickness and fire rating, the opening and what passes through. Several services through one opening become a multi-service installation, and an activity can be duplicated.

What if no solution fits on site?

The installer can still choose the components used, filtered by manufacturer, and record the deviation with a photo and a message. The office sees it after the next sync and can select an alternative.

Which statuses can an activity have?

New, scheduled, in progress, done, approved, not approved, damaged and maintenance. These are the standard statuses; you can adapt them to the way you work, and filter on them in Office and in the app.

How do installers and the office communicate?

Every activity has its own messages. Changes, such as the solution that was chosen, are logged there automatically, and installers can tell the office what they found on site.

Where do I get the Field app?

In Office, under Licences and then Apps, you download the Field app for your installers. Each installer needs a Field License; project leaders with an Office License already have access to the app.

For manufac­turers

What are BIM Solutions?

BIM Solutions are manufacturer-specific firestop solutions, available as BIM objects in Orange Button. Each BIM Solution is a certified firestop system for one specific situation: an installation type, insulation type and construction type, in a round or square opening. It includes a description, the selected firestop components, a 3D image, a section image and the countries where it may be applied. When Orange Button finds a clash, it loads the matching BIM Solution into your BIM project automatically. You choose which manufacturers and solutions you prefer.

What is the difference between a component and a BIM Solution?

A component is a single product, such as a collar, wrap, sealant, mortar or batt. A BIM Solution is a complete tested system: the components that together seal one kind of penetration, with the rules of its Field of Application.

What is a Field of Application, and why does it matter?

The conditions under which a firestop system is tested and approved: wall or floor type and thickness, fire rating, service type and size, insulation, opening and distances. A seal outside its Field of Application is no longer certified, so Orange Button checks every penetration against it.

What do we need to deliver to get our systems on the platform?

Your Solution List, your Field of Application and the drawings. We build the BIM objects, upload them and integrate everything. It takes about three months.

Can we connect our own product database?

Yes. A structured database can be connected through a live API, so your Field of Application stays up to date on the platform without re-entering anything.

How do contractors end up with our systems?

Contractors choose their preferred manufacturers. Wherever a penetration fits your Field of Application, your BIM Solution is selected automatically, placed in the model and shown to the installer on site.

What insight do we get?

Usage data: which of your solutions are designed and installed, in which projects, so you see how contractors use your systems.

What is the difference between OB Manufacturer and OB Enterprise?

With OB Manufacturer your tested systems are available to every Orange Button user. With OB Enterprise you also get the whole platform as your own: OB BIM, Office and Field in your brand, on your own address, with licences you hand to your clients. Promat by Etex works this way.

How do contractors see our solutions?

Each BIM Solution has a name that says what it is: manufacturer, what passes through, the construction, the products and the shape of the opening. Contractors see its description and fire rating, the components, the countries where it is approved, the Revit object and a 3D image of the finished seal. A missing image will not appear in their report either.

Do our components need to be on the platform as well?

Yes, that helps. Components are the products a solution is made of, such as sealants, foams, coated boards and collars, each with its code, description and a link to your product page. When no solution fits on site, installers can still choose your components.

Pricing, accounts and security

What does it cost to start?

Nothing. You start free with 200 firestop clashes a month and one project in Office, no credit card needed. After that you choose a monthly clash credit for the BIM License, with at least one Office License, and the price per clash drops as your volume grows.

Which licences do I need?

We think in roles. A project leader needs an Office License, which includes access to the Field app for inspections on site. An installer only needs a Field License. With a BIM model you add a BIM License.

Is there a discount for yearly billing?

Yes. With yearly billing you save 25% on the BIM, Office and Field licences.

Is our project and product data safe?

Yes. Orange Button is ISO 27001 certified for information security and ISO 9001 certified for quality management, so project data, BIM models and product data are demonstrably secure.

How do I see how many clashes I have left?

The bar at the top of Office shows your clash balance. The clashes you upload come off your balance, and under Licences you see your licences and balance in detail.

Does Orange Button support two-factor authentication?

Yes. Protect your account with two-factor authentication (2FA) and keep your recovery codes somewhere safe.

Push the button.

Certified firestop by design. Find your first firestop clashes today, free up to 200 a month.