Orange Button BIM
Brandwerende doorvoeringen vinden, gewoon in je browser.
BIM Online is de browserversie van Orange Button BIM. Importeer je IFC-modellen, controleer ze, vind elke brandwerende doorvoering, meet de afstanden en stuur een complete clashlijst naar Orange Button Office. Je hebt geen Revit en geen BIM-ervaring nodig.
Geen Revit nodig
Alles draait in de browser, dus brandpreventiespecialisten zonder BIM-software kunnen direct beginnen.
Eerst controleren, dan clashen
Een Checklist met stoplichtkleuren laat zien welke informatie in de modellen ontbreekt, nog voordat je één clash telt.
Direct naar Office
Upload de plattegronden en de clashlijst naar Orange Button Office, waar elke clash een gecertificeerde oplossing krijgt.
Probeer het zelf
Klik zelf door een demo van BIM Online.
Een vereenvoudigde demo met één klein voorbeeldproject en twee IFC-modellen: controleer de data, draai de clashdetectie en meet de afstanden, in vijf stappen, in je browser, zonder account. De volledige functies uitproberen? Registreer je dan nu gratis!
Op je telefoon opent de demo schermvullend en liggend. Sluiten doe je rechtsboven.
De demo kan in deze browser niet worden getoond. Bekijk de videotour. Bekijk de videotour →
Dit was een klein stukje van BIM Online.
Nu met je eigen modellen: gratis tot 200 clashes per maand.
Sparingen (builders work)
Clashen met sparingen, niet alleen met wanden en vloeren.
Op veel projecten, en op bijna elk project in het Verenigd Koninkrijk, zijn de sparingen voor installaties builders work in connection (BWIC): gaten, mantelbuizen en uitsparingen die al gemaakt zijn voordat de installaties worden aangebracht. Orange Button BIM clasht met die sparingen en vindt en analyseert automatisch elke doorvoering erdoorheen.
- 1Sparingen als clashcategorieSparingen in het model (void- of opening-elementen) doen naast wanden, vloeren en brandwerende platen mee in de clashdetectie.
- 2Elke doorvoering gevondenElke leiding, elk kanaal en elke kabelgoot door een sparing wordt automatisch gevonden en aan die sparing gekoppeld.
- 3Getoetst aan geteste systemenOrange Button toetst maat en vorm van de sparing, de afstand van elke installatie tot de rand en de ruimte tussen installaties aan de regels van de geteste systemen.
- 4Eén sparing, één MSPEen sparing met twee of meer installaties wordt automatisch een MSP (multi-service doorvoering), afgestemd op de maat van de sparing en genummerd in de clashlijst.
In BIM Online met je IFC-modellen, en in Revit met de OneClick app Apertures.
Bekijk: Engineering, afstanden en MSP'sVideotour · BIM Online
Van IFC-bestanden tot een complete clashlijst.
Twaalf korte video's: importeer en controleer je modellen, vind en beoordeel elke clash, meet de afstanden, stuur het resultaat naar Orange Button Office en werk met sparingen.
01Intro: wat BIM Online doet
Lees het transcript
01 Intro: wat BIM Online doet
Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.
A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.
BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.
02 Inloggen, het scherm en je bestanden
When you open a project from Orange Button Office, you're signed in automatically. Let's look at the screen.
Top left is the toolbar with the main tools. Files. Data Manager. Clash Detection. Engineering. And Save & Export.
In the middle you'll find the floor plans. The Category Filter. And a search box.
In the top-right corner is the ViewCube. Next to it is your account menu, where you can switch between light and dark mode.
Start in the Files panel. Click Import IFC File and select all your models at once – or just drag them onto the screen.
BIM Online reads each file's discipline from its name: architectural, structural, plumbing, Advice and so on. Check it here. The discipline matters – an Advice file, for example, is treated as fire-rating information, not as real walls. If it's wrong, change it from the dropdown.
Sometimes a model contains one element kilometres away, so everything looks tiny. Use Crop project: BIM Online suggests a box around the real building. Adjust it and confirm. Elements outside are hidden and left out of clash detection.
In the next video you'll learn to move around the model.
03 Door het model navigeren
A 3D model only helps if you can find your way around it. In this video you'll learn to move through the building, select elements and look inside – with the mouse, the view buttons and the filters.
The left mouse button orbits. The right mouse button pans. And the scroll wheel zooms towards whatever is under your cursor. You can zoom right through walls to get inside the building.
Hover over an element to see an orange outline and its name just below the top bar. If several elements sit behind each other, press Tab to step through them.
A single click does nothing – double-click to select. The element is highlighted, the view zooms to it and its properties open on the right. Double-click empty space to clear the selection.
Next to the ViewCube are three buttons. Reset view. And X-ray, which makes the construction files transparent so you can see the installations inside.
The third is the section box. With nothing selected it covers the whole project; with an element selected it boxes that element. Drag the handles to cut the model open.
Under the cube you switch between perspective and orthographic. Click X-ray and the section box again to switch them off.
The Category Filter shows or hides whole categories. The small square sets whether a category gets a solid fill where the section box cuts it. Click a category name to go one level deeper: every type in that category, each with its own visibility, colour and transparency. For example, give the pipes and ducts a bright colour. Then switch on X-ray to make the construction transparent – the installations stand out at once.
Finally, the search box. Type part of a name or a type code and everything that doesn't match fades out.
Next, we'll look at an element's properties and the Orange Button parameters.
04 Eigenschappen en Orange Button-parameters
The Properties panel shows everything about the selected element. The top part is Orange Button: the information the firestop solution needs. Below are the original IFC properties from the model, which you can read but not change.
BIM Online fills in as much Orange Button data as it can from the IFC file. Where something is missing you'll see a dash. Hover a value and click to edit it – types are picked from a list, sizes you type in millimetres.
If no property gives a size, BIM Online measures the geometry and suggests a value. It never fills it in by itself – click Use if the suggestion is right.
Looking for a property? Use the search box at the top of the panel. Want to see an IFC property for all elements? Right-click it and add it to a Data Manager table.
Every kind of element has its own properties. A wall carries its fire rating and thickness. A pipe carries its system and diameter. With the Category Filter you show only the pipes. Hover one to see what it is.
Next, we'll set up the building storeys and floor plans.
05 Bouwlagen en plattegronden
Floor plans organise everything in BIM Online: clashes are numbered per level and the Clashlist is grouped by them. Before you run clash detection, open Building storeys & floor plans.
The storeys come from one of your IFC models. Choose which model to take them from – usually the architectural one. Then tick the storeys you need. Each ticked storey becomes a floor plan.
Each floor plan runs from a bottom level to a top level, taken from the storeys in the IFC. With the offsets you move those limits up or down. The cut plane sets the height at which the plan is cut – usually one and a half metres above the floor.
Need to see more or less of a level? Change its offsets here, and the floor plan follows at once. If you skip this dialog, BIM Online will ask you when you open the clash tools.
Pick a level from the dropdown to see its plan from above. Clashes show up as pins.
A floor plan has its own tools. The cube shows the plan as a 3D inspection view. Place Marker adds a clash by hand. And with the fire rating brush you click walls to give them a fire rating – Ctrl and the scroll wheel change the value. The eraser clears it again.
Choose All Levels to go back to 3D.
With the floor plans set up, the next step is to check the models, with the Checklist.
06 De modellen controleren: de Checklist
Before you look for clashes, check whether the models contain the information a firestop solution needs. That's what the Checklist is for.
Every wall, floor and installation gets a row with a traffic light. Green is complete. Orange is worth a look. Red means required information is missing. The missing cells are coloured too.
In our usual process the checklist goes to the client first. Export it as a PDF from Save and Export. Per file and category it shows what's complete, so the modellers know what to improve.
When the improved models come back, import them again, and the checklist updates by itself.
Some information you can add yourself. Double-click a red cell and pick the right value. The traffic light turns green.
When the checklist is green, you're ready for clash detection.
07 Clashdetectie instellen en uitvoeren
Open Clash Detection. The first time you run it, an overview shows which categories take part. BIM Online sets sensible defaults based on your files, so you rarely need to change them.
Want to know exactly what counts as a clash? Click the info button. It explains the rules for walls, floors and openings, step by step.
When the models change, run detection again. Update keeps what you've already checked – marks, approvals and removed clashes – and adds what's new. Add only leaves every existing clash as it is. Replace starts over.
You can also run it for certain installation files only, and keep the existing clash numbers.
Click Run. On a big project this can take a few minutes, and you can cancel at any time. When it's done, every clash appears as a marker in the model and in the list.
Next, we'll review the clashes one by one.
08 Clashes beoordelen
The Clash panel lists every clash, grouped by construction or by floor plan. Use the filters to narrow it down – for example, only floors, or only ducts.
Open a group and BIM Online cuts the model around that wall so you see just its clashes. Check each one. Tick it to approve – the marker turns green. Not a real clash? Remove it; you'll find it back under Removed.
BIM Online combines what belongs together: a pipe through a wall with three layers is one clash, not three. The badge shows how many elements were combined. Click it to see exactly what's inside, and separate an element if it shouldn't be there.
In 3D every clash has a sphere, an outline on both faces of the wall and a flag with its number. Right-click a clash for all its actions – including moving it within its wall.
Missing a clash? Use Place manual clash and click the spot. Working on an apartment building where only one apartment is modelled? Copy its clashes, then paste them in the other apartments – rotate with R, mirror with M – or paste them to several levels at once with To levels. Copied and manual clashes are kept when you run detection again.
You can also check the clashes on a floor plan. Pick a level: every clash is a pin. Click a pin to select that clash.
Once every clash is checked, the next step is to complete their information – in the Data Manager.
09 De Data Manager
The Data Manager is where you check and complete information in bulk. On the left are your tables.
You know the Checklist from the previous video. Here we look at the other tables, starting with the Clashlist.
The Clashlist is exactly what will be sent to Orange Button Office – every row is a clash. Click a row to find the clash in 3D, or switch to In view to see only the clashes you're looking at.
A red cell means a clash is still missing information. Double-click it, pick the right value, and the traffic light follows.
Use the toolbar to choose columns, add filters and group or sort. Grouping by installation type, for example, shows every type once. Fill in a group, and every clash in it follows. Like the result? Store it as a schedule of your own.
Number your clashes from the Number button. Choose a prefix and start number, limit it to certain levels or sections if you like, and run. Clashes and MSPs are numbered separately.
Press the i button for all keyboard shortcuts. And under Stored Sections you keep the section boxes you want to come back to.
In the next video, Engineering checks the space around your penetrations.
10 Engineering: afstanden en MSP’s
Firestop products need space around them. Engineering measures that space for every wall and floor with penetrations. There are three distances. A: between penetrations. B: from a penetration to the edge of an opening or block. C: between services inside one opening or block. Set the required values in Settings – per construction type or installation type.
Click Measure distances. When it's done, every wall and floor with penetrations is listed per level. The red number shows how many problems each one has.
Open a wall to see where the problem is. Here two pipes are only 60 millimetres apart, where 100 is needed. There are two ways to fix it. Combine them into one MSP – a multi-service penetration, sealed as one block. Or move the penetrations further apart in the model.
The Engineering viewer shows each wall in detail. Front, side and top views with dimensions. The 3D model. And the floor plan. You can draw or adjust MSP boxes, measure, and leave comments. Then mark the wall as approved.
Approving an MSP numbers it and adds it to the Clashlist as one block. Openings that hold two or more clashes become an approved MSP automatically. Back in the 3D view, Place suggested MSPs does this for every wall at once. When you're done, export the engineering report: per level a plan, then one sheet per wall with all views, sizes and comments.
Next, we'll save the project and send the result to Orange Button Office.
11 Opslaan, exporteren, hulp en afsluiting
Everything is saved through Save & Export. Save a draft to the server with Ctrl+S while you work; publish a version when it's ready for others.
Then send the result to Orange Button Office: upload the floor plans, then the Clashlist. Before uploading, BIM Online warns you if clashes are missing information needed to find a solution. You can still upload, but it's better to fix it first.
Need the clashes back in your BIM software? Export them as IFC – a full file you can re-import, or a quotation or engineering deliverable.
Stuck? Most panels have a video button with a short guide.
That's BIM Online: import, check, detect, complete, engineer and upload. In one more video, we look at how BIM Online works with BWIC openings.
12 Sparingen voor installaties (BWIC)
In the UK, the openings for services are often designed before the firestops: builder's work in connection, or BWIC. When those openings are in the model, BIM Online puts them to work.
Open the Data Manager and choose Openings. Every opening in the model is listed, with its number, its shape and its size. The number is taken from the opening's own Mark.
To link them to the clashes, open Clash Detection and click Re-run. Under Clash settings, tick Data for Openings: an opening then gives its number and size to the clash it sits in.
Then choose Opening information only. Your clashes stay as they are; only the opening at each clash is looked up. BIM Online shows what it found before you apply it.
In the Clashlist, add the Opening Number and MSP columns. Where two or more services pass through the same opening, it becomes an MSP: a multi-service penetration, sealed as one block.
So the Clashlist shows at a glance which services pass through which opening.
Engineering uses the same openings. Its wall views show each opening with the services inside, so the firestop design matches the builder's work on site.
So the openings, the clashes and the firestops line up: one Clashlist that tells the builder, the installer and the firestop specialist the same thing.
In the UK, the Building Safety Act asks for a golden thread: for higher-risk buildings, every opening must be traceable from early design to the work on site. Orange Button covers that whole thread. The opening is designed and checked here, in BIM Online. Orange Button Office picks the certified firestop. And on site, the installer records it in the Field app, with a photo and a status.
Thanks for watching.
BIM Online
Korte video's per paneel
Een korte video voor elk paneel in BIM Online, plus een preview van de Compliance Checker.
Wat BIM Online doet
- 01
Importeer en bereid je modellen voor
Sleep al je IFC-bestanden in één keer naar binnen. BIM Online herkent de discipline van elk bestand aan de bestandsnaam, zodat een model met brandwerendheidsadvies als informatie wordt behandeld en niet als wanden.
- Bouwkundige, constructieve en installatiemodellen samen
- Crop project om losse elementen ver buiten het gebouw te verbergen
- Röntgenweergave, doorsnedebox en categoriefilter om naar binnen te kijken
- 02
Alle informatie voor een brandwerende afdichting
Elk element krijgt zijn Orange Button-parameters: constructietype en dikte, brandwerendheid, en installatietype en maat. BIM Online haalt zoveel mogelijk uit de IFC; jij vult de rest aan.
- Ontbrekende waarden in één oogopslag
- Type kiezen uit een lijst, maten in millimeters
- Originele IFC-eigenschappen blijven alleen-lezen
- 03
De Checklist
Voordat je clashes zoekt, krijgt elke wand, vloer en installatie een stoplichtkleur. Stuur de checklist als PDF naar de modelleur; komen de verbeterde modellen terug, dan werkt de checklist zichzelf bij.
- Groen: compleet, oranje: nakijken, rood: ontbreekt
- PDF per bestand en categorie
- Vul ontbrekende waarden zelf in
- 04
Clashdetectie op basis van regels
BIM Online vindt clashes met vaste regels voor wanden, vloeren en sparingen en nummert ze per plattegrond. Een leiding door een wand van drie lagen is één clash, geen drie.
- Bouwlagen en plattegronden uit je IFC
- Na modelwijzigingen opnieuw uitvoeren: je controles blijven bewaard
- Keur elke clash goed of verwijder hem, of plaats er handmatig een
- 05
In bulk aanvullen
De Data Manager toont de Clashlist precies zoals die naar Office gaat. Groepeer, filter en vul een hele groep in één keer in, en nummer daarna je clashes en MSP's.
- Rode cellen tonen ontbrekende informatie
- Vul een groep in en elke clash neemt het over
- Nummering per verdieping, met je eigen prefix
- 06
Engineering en de Compliance Checker
Brandwerende producten hebben ruimte nodig. Engineering toetst elke wand en vloer met doorvoeringen aan de afstanden die jij instelt, en helpt je op te lossen wat niet past.
- A tussen doorvoeringen, B tot de rand van de sparing, C binnen één sparing
- Combineer doorvoeringen tot een MSP, of zet ze verder uit elkaar
- Engineeringrapport: een plattegrond per verdieping en een blad per wand
- 07
Naar Office, en terug naar BIM
Sla concepten op terwijl je werkt en publiceer een versie zodra die klaar is. Upload de plattegronden en de clashlijst naar Orange Button Office, of exporteer de clashes als IFC.
- Een waarschuwing voordat je onvolledige clashes uploadt
- IFC-export om opnieuw in te lezen in je BIM-software
- Een instructievideo in de meeste panelen
Nieuw · Compliance Checker
Alle A-, B- en C-afstanden, automatisch gecontroleerd.
De Compliance Checker in OB BIM controleert alle afstanden tussen installaties en sparingen in je project. Je vindt hem in BIM Online onder Engineering. Hij markeert elke overtreding, helpt je die op te lossen en maakt een rapport dat je kunt delen.
- ATussen installatiesMinimale afstand tussen elementen, per elementtype en constructiecategorie.
- BTot de rand van de sparingMinimale afstand van elk element tot de rand van een sparing of gecombineerde doorvoering.
- CBinnen één sparingMinimale afstand tussen elementtypes binnen één sparing of MSP.
Stel je eigen afstandstabellen in per brandwerende oplossing, voer de controle uit op alle clashes en exporteer de overtredingen per constructie als pdf.Bekijk de preview →
Ook beschikbaar
Werk je liever in Revit?
De Revit Edition brengt dezelfde clash-engine naar Autodesk Revit, samen met OneClick apps die je het repetitieve werk bij het modelleren van brandwerende afdichtingen uit handen nemen.
- AperturesControleer en maak in één keer sparingen voor alle installaties.
- MSP (multi-service doorvoeringen)Groepeer installaties in één sparing volgens geteste regels.
- NumberingNummer alle afdichtingslocaties consistent.
- BatchLinkKoppel meerdere modellen tegelijk.
Revit Edition
Video's voor de Revit Edition
Installeer de plugin, koppel je modellen en vind de brandwerende doorvoeringen in Autodesk Revit. Plus de OneClick apps die je het repetitieve werk uit handen nemen.
Vragen
Wat is een clash?
Een clash is een plek waar een installatie, zoals een leiding, kanaal of kabelgoot, door een brandwerende wand of vloer gaat. Elke opening heeft een geteste brandwerende afdichting nodig: een gecertificeerde brandwerende oplossing.
Kan Orange Button clashen met sparingen (builders work)?
Ja. Sparingen (BWIC) in het model doen mee in de clashdetectie. Elke doorvoering door een sparing wordt automatisch gevonden en getoetst aan de geteste systemen: maat en vorm van de sparing, afstand tot de rand en tussen installaties. Een sparing met twee of meer installaties wordt één MSP (multi-service doorvoering).
Hoe worden clashes geteld?
Elke unieke clashpositie telt als één clash. De eerste 200 per maand zijn gratis; daarboven daalt de prijs per clash naarmate je volume groeit.
Heb ik Autodesk Revit nodig?
Nee. BIM Online draait volledig in je browser. De Revit Edition is bedoeld voor teams die al in Revit modelleren en de OneClick apps willen gebruiken.
