Videos

See every product at work.

Three video tours, straight from the software. Watch them in order, or jump to the chapter you need.

Video tour · BIM Online

From IFC files to a complete clashlist.

Twelve short videos: import and check your models, find and review every clash, measure the distances, send the result to Orange Button Office, and work with BWIC openings.

12 videos · 21 min

01Intro: what BIM Online makes

Read the transcript

01 Intro: what BIM Online makes

Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.

A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.

BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.

Video tour · Office

From clashlist to approved firestop.

Fourteen short videos: set up your company and manufacturers, generate certified solutions, and follow the work on site through to the report.

14 videos · 18 min

01Introducing Orange Button Office

Read the transcript

01 Introducing Orange Button Office

Welcome to Orange Button Office. A firestop is only certified when it is installed exactly as its approval says. Office finds the solution that fits each penetration.

The firestop is the last trade on site, after the main contractor, the installer and the drywall specialist. So it has to be fast, and right first time. Even better: with good engineering you are involved earlier, in the design phase.

The dashboard shows at a glance how your projects are doing.

Under Projects you find all your projects, each in its own phase.

Open a project and you see its clashlist. For every penetration it shows which certified solution goes with it.

Solutions and Components hold the products of the manufacturers you work with.

And then Field activities. This is where the work from site comes in, until it's approved.

In the next videos we look at the settings and get Office ready to use.

Video tour · Field

The Field app on site.

Five short videos: work offline, find your way on the floor plans, record penetrations, choose the solution and prove the work with photos.

5 videos · 7 min

01Working offline and syncing

Read the transcript

01 Working offline and syncing

Your installers record their work on site with the Orange Button Field app. Their projects are on the start screen.

Sites often have no signal. So before you go, download the project. Tap the download icon and choose what to take along: the solutions and components, and the images.

The download takes a minute or so. Keep the app open until it's done.

Then a message tells you the project is ready for offline use.

The crossed-out cloud at the top shows you're working offline. Everything you record is saved on the phone.

Under Account, Offline settings decide which manufacturer libraries stay on the phone. With them, you can choose a solution without a connection.

Back online? Press and hold the project, and tap Synchronize.

Your changes go to Orange Button Office. A message confirms that the sync has been submitted.

Under Sync you see every synchronization. Open one to see what it sent: here, one floor plan with two activities.

And there it is: sync complete. In Office, the work from site is now there for the whole team.

In the next video we open a project and find our way around its floor plans and activities.

Videos

More videos

Short videos per topic, from getting started in Revit to the OneClick apps. They play right here.

Push the button.

Certified firestop by design. Find your first firestop clashes today, free up to 200 a month.