Orange Button BIM
Kollisionsprüfung für den Brandschutz, direkt im Browser.
BIM Online ist die Browser-Version von Orange Button BIM. Importieren Sie Ihre IFC-Modelle, prüfen Sie sie, finden Sie jeden Clash, messen Sie die Abstände und senden Sie eine vollständige Clash-Liste an Orange Button Office. Ohne Revit und ohne BIM-Erfahrung.
Kein Revit nötig
Alles läuft im Browser, sodass Brandschutz-Fachbetriebe ohne BIM-Software sofort loslegen können.
Geprüft, bevor Sie Clashes suchen
Eine Ampel-Checklist zeigt, welche Informationen in den Modellen fehlen, bevor Sie einen einzigen Clash zählen.
Direkt an Office
Laden Sie die Grundrisse und die Clash-Liste in Orange Button Office hoch, wo jeder Clash eine zertifizierte Lösung erhält.
Selbst ausprobieren
Klicken Sie sich durch eine Demo von BIM Online.
Eine vereinfachte Demo mit einem kleinen Beispielprojekt und zwei IFC-Modellen: Daten prüfen, die Clash-Erkennung starten und die Abstände messen, in fünf Schritten, im Browser, ohne Konto. Alle Funktionen ausprobieren? Registrieren Sie sich jetzt kostenlos!
Auf dem Smartphone öffnet sich die Demo im Vollbild und im Querformat. Schließen oben rechts.
Die Demo kann in diesem Browser nicht angezeigt werden. Sehen Sie sich die Videotour an. Videotour ansehen →
Das war ein kleiner Teil von BIM Online.
Jetzt mit Ihren eigenen Modellen: kostenlos bis 200 Clashes pro Monat.
Aussparungen und Durchbrüche (builders work)
Clashes mit Aussparungen und Durchbrüchen, nicht nur mit Wänden und Decken.
In vielen Projekten, und in fast jedem Projekt in Großbritannien, entstehen die Öffnungen für Installationen als Aussparungen und Durchbrüche (builders work in connection, BWIC), bevor die Leitungen eingebaut sind: das Ergebnis der Schlitz- und Durchbruchsplanung. Orange Button BIM prüft gegen diese Öffnungen und erkennt und analysiert automatisch jede Durchführung, die durch sie hindurchgeht.
- 1Öffnungen als Clash-KategorieAussparungen im Modell, als Void- oder Opening-Elemente, nehmen neben Wänden, Decken und feuerwiderstandsfähigen Platten an der Kollisionsprüfung teil.
- 2Jede Durchführung erkanntJedes Rohr, jeder Kanal und jede Kabeltrasse durch eine Öffnung wird automatisch gefunden und mit dieser Öffnung verknüpft.
- 3Geprüft anhand geprüfter SystemeGröße und Form der Öffnung, der Abstand jeder Leitung zum Rand der Öffnung und der Abstand zwischen den Leitungen werden anhand der Regeln der geprüften Systeme kontrolliert.
- 4Eine Öffnung, eine MSPEine Öffnung mit zwei oder mehr Leitungen wird automatisch zu einer Kombiabschottung, auf die Öffnung bemessen und in der Clash-Liste nummeriert.
In BIM Online mit Ihren IFC-Modellen und in Revit mit der OneClick app Apertures.
Ansehen: Engineering, Abstände und MSPsVideotour · BIM Online
Von IFC-Dateien zur vollständigen Clash-Liste.
Zwölf kurze Videos: Modelle importieren und prüfen, jeden Clash finden und prüfen, die Abstände messen, das Ergebnis an Orange Button Office senden und mit Öffnungen arbeiten.
01Intro: was BIM Online leistet
Transkript lesen
01 Intro: was BIM Online leistet
Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.
A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.
BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.
02 Anmelden, Bildschirm und Dateien
When you open a project from Orange Button Office, you're signed in automatically. Let's look at the screen.
Top left is the toolbar with the main tools. Files. Data Manager. Clash Detection. Engineering. And Save & Export.
In the middle you'll find the floor plans. The Category Filter. And a search box.
In the top-right corner is the ViewCube. Next to it is your account menu, where you can switch between light and dark mode.
Start in the Files panel. Click Import IFC File and select all your models at once – or just drag them onto the screen.
BIM Online reads each file's discipline from its name: architectural, structural, plumbing, Advice and so on. Check it here. The discipline matters – an Advice file, for example, is treated as fire-rating information, not as real walls. If it's wrong, change it from the dropdown.
Sometimes a model contains one element kilometres away, so everything looks tiny. Use Crop project: BIM Online suggests a box around the real building. Adjust it and confirm. Elements outside are hidden and left out of clash detection.
In the next video you'll learn to move around the model.
03 Im Modell navigieren
A 3D model only helps if you can find your way around it. In this video you'll learn to move through the building, select elements and look inside – with the mouse, the view buttons and the filters.
The left mouse button orbits. The right mouse button pans. And the scroll wheel zooms towards whatever is under your cursor. You can zoom right through walls to get inside the building.
Hover over an element to see an orange outline and its name just below the top bar. If several elements sit behind each other, press Tab to step through them.
A single click does nothing – double-click to select. The element is highlighted, the view zooms to it and its properties open on the right. Double-click empty space to clear the selection.
Next to the ViewCube are three buttons. Reset view. And X-ray, which makes the construction files transparent so you can see the installations inside.
The third is the section box. With nothing selected it covers the whole project; with an element selected it boxes that element. Drag the handles to cut the model open.
Under the cube you switch between perspective and orthographic. Click X-ray and the section box again to switch them off.
The Category Filter shows or hides whole categories. The small square sets whether a category gets a solid fill where the section box cuts it. Click a category name to go one level deeper: every type in that category, each with its own visibility, colour and transparency. For example, give the pipes and ducts a bright colour. Then switch on X-ray to make the construction transparent – the installations stand out at once.
Finally, the search box. Type part of a name or a type code and everything that doesn't match fades out.
Next, we'll look at an element's properties and the Orange Button parameters.
04 Eigenschaften und Orange-Button-Parameter
The Properties panel shows everything about the selected element. The top part is Orange Button: the information the firestop solution needs. Below are the original IFC properties from the model, which you can read but not change.
BIM Online fills in as much Orange Button data as it can from the IFC file. Where something is missing you'll see a dash. Hover a value and click to edit it – types are picked from a list, sizes you type in millimetres.
If no property gives a size, BIM Online measures the geometry and suggests a value. It never fills it in by itself – click Use if the suggestion is right.
Looking for a property? Use the search box at the top of the panel. Want to see an IFC property for all elements? Right-click it and add it to a Data Manager table.
Every kind of element has its own properties. A wall carries its fire rating and thickness. A pipe carries its system and diameter. With the Category Filter you show only the pipes. Hover one to see what it is.
Next, we'll set up the building storeys and floor plans.
05 Geschosse und Grundrisse
Floor plans organise everything in BIM Online: clashes are numbered per level and the Clashlist is grouped by them. Before you run clash detection, open Building storeys & floor plans.
The storeys come from one of your IFC models. Choose which model to take them from – usually the architectural one. Then tick the storeys you need. Each ticked storey becomes a floor plan.
Each floor plan runs from a bottom level to a top level, taken from the storeys in the IFC. With the offsets you move those limits up or down. The cut plane sets the height at which the plan is cut – usually one and a half metres above the floor.
Need to see more or less of a level? Change its offsets here, and the floor plan follows at once. If you skip this dialog, BIM Online will ask you when you open the clash tools.
Pick a level from the dropdown to see its plan from above. Clashes show up as pins.
A floor plan has its own tools. The cube shows the plan as a 3D inspection view. Place Marker adds a clash by hand. And with the fire rating brush you click walls to give them a fire rating – Ctrl and the scroll wheel change the value. The eraser clears it again.
Choose All Levels to go back to 3D.
With the floor plans set up, the next step is to check the models, with the Checklist.
06 Modelle prüfen: die Checkliste
Before you look for clashes, check whether the models contain the information a firestop solution needs. That's what the Checklist is for.
Every wall, floor and installation gets a row with a traffic light. Green is complete. Orange is worth a look. Red means required information is missing. The missing cells are coloured too.
In our usual process the checklist goes to the client first. Export it as a PDF from Save and Export. Per file and category it shows what's complete, so the modellers know what to improve.
When the improved models come back, import them again, and the checklist updates by itself.
Some information you can add yourself. Double-click a red cell and pick the right value. The traffic light turns green.
When the checklist is green, you're ready for clash detection.
07 Kollisionsprüfung einrichten und starten
Open Clash Detection. The first time you run it, an overview shows which categories take part. BIM Online sets sensible defaults based on your files, so you rarely need to change them.
Want to know exactly what counts as a clash? Click the info button. It explains the rules for walls, floors and openings, step by step.
When the models change, run detection again. Update keeps what you've already checked – marks, approvals and removed clashes – and adds what's new. Add only leaves every existing clash as it is. Replace starts over.
You can also run it for certain installation files only, and keep the existing clash numbers.
Click Run. On a big project this can take a few minutes, and you can cancel at any time. When it's done, every clash appears as a marker in the model and in the list.
Next, we'll review the clashes one by one.
08 Clashes prüfen
The Clash panel lists every clash, grouped by construction or by floor plan. Use the filters to narrow it down – for example, only floors, or only ducts.
Open a group and BIM Online cuts the model around that wall so you see just its clashes. Check each one. Tick it to approve – the marker turns green. Not a real clash? Remove it; you'll find it back under Removed.
BIM Online combines what belongs together: a pipe through a wall with three layers is one clash, not three. The badge shows how many elements were combined. Click it to see exactly what's inside, and separate an element if it shouldn't be there.
In 3D every clash has a sphere, an outline on both faces of the wall and a flag with its number. Right-click a clash for all its actions – including moving it within its wall.
Missing a clash? Use Place manual clash and click the spot. Working on an apartment building where only one apartment is modelled? Copy its clashes, then paste them in the other apartments – rotate with R, mirror with M – or paste them to several levels at once with To levels. Copied and manual clashes are kept when you run detection again.
You can also check the clashes on a floor plan. Pick a level: every clash is a pin. Click a pin to select that clash.
Once every clash is checked, the next step is to complete their information – in the Data Manager.
09 Der Data Manager
The Data Manager is where you check and complete information in bulk. On the left are your tables.
You know the Checklist from the previous video. Here we look at the other tables, starting with the Clashlist.
The Clashlist is exactly what will be sent to Orange Button Office – every row is a clash. Click a row to find the clash in 3D, or switch to In view to see only the clashes you're looking at.
A red cell means a clash is still missing information. Double-click it, pick the right value, and the traffic light follows.
Use the toolbar to choose columns, add filters and group or sort. Grouping by installation type, for example, shows every type once. Fill in a group, and every clash in it follows. Like the result? Store it as a schedule of your own.
Number your clashes from the Number button. Choose a prefix and start number, limit it to certain levels or sections if you like, and run. Clashes and MSPs are numbered separately.
Press the i button for all keyboard shortcuts. And under Stored Sections you keep the section boxes you want to come back to.
In the next video, Engineering checks the space around your penetrations.
10 Engineering: Abstände und MSPs
Firestop products need space around them. Engineering measures that space for every wall and floor with penetrations. There are three distances. A: between penetrations. B: from a penetration to the edge of an opening or block. C: between services inside one opening or block. Set the required values in Settings – per construction type or installation type.
Click Measure distances. When it's done, every wall and floor with penetrations is listed per level. The red number shows how many problems each one has.
Open a wall to see where the problem is. Here two pipes are only 60 millimetres apart, where 100 is needed. There are two ways to fix it. Combine them into one MSP – a multi-service penetration, sealed as one block. Or move the penetrations further apart in the model.
The Engineering viewer shows each wall in detail. Front, side and top views with dimensions. The 3D model. And the floor plan. You can draw or adjust MSP boxes, measure, and leave comments. Then mark the wall as approved.
Approving an MSP numbers it and adds it to the Clashlist as one block. Openings that hold two or more clashes become an approved MSP automatically. Back in the 3D view, Place suggested MSPs does this for every wall at once. When you're done, export the engineering report: per level a plan, then one sheet per wall with all views, sizes and comments.
Next, we'll save the project and send the result to Orange Button Office.
11 Speichern, Exportieren, Hilfe und Abschluss
Everything is saved through Save & Export. Save a draft to the server with Ctrl+S while you work; publish a version when it's ready for others.
Then send the result to Orange Button Office: upload the floor plans, then the Clashlist. Before uploading, BIM Online warns you if clashes are missing information needed to find a solution. You can still upload, but it's better to fix it first.
Need the clashes back in your BIM software? Export them as IFC – a full file you can re-import, or a quotation or engineering deliverable.
Stuck? Most panels have a video button with a short guide.
That's BIM Online: import, check, detect, complete, engineer and upload. In one more video, we look at how BIM Online works with BWIC openings.
12 Öffnungen für Installationen (BWIC)
In the UK, the openings for services are often designed before the firestops: builder's work in connection, or BWIC. When those openings are in the model, BIM Online puts them to work.
Open the Data Manager and choose Openings. Every opening in the model is listed, with its number, its shape and its size. The number is taken from the opening's own Mark.
To link them to the clashes, open Clash Detection and click Re-run. Under Clash settings, tick Data for Openings: an opening then gives its number and size to the clash it sits in.
Then choose Opening information only. Your clashes stay as they are; only the opening at each clash is looked up. BIM Online shows what it found before you apply it.
In the Clashlist, add the Opening Number and MSP columns. Where two or more services pass through the same opening, it becomes an MSP: a multi-service penetration, sealed as one block.
So the Clashlist shows at a glance which services pass through which opening.
Engineering uses the same openings. Its wall views show each opening with the services inside, so the firestop design matches the builder's work on site.
So the openings, the clashes and the firestops line up: one Clashlist that tells the builder, the installer and the firestop specialist the same thing.
In the UK, the Building Safety Act asks for a golden thread: for higher-risk buildings, every opening must be traceable from early design to the work on site. Orange Button covers that whole thread. The opening is designed and checked here, in BIM Online. Orange Button Office picks the certified firestop. And on site, the installer records it in the Field app, with a photo and a status.
Thanks for watching.
BIM Online
Kurze Videos pro Panel
Ein kurzes Video für jedes Panel in BIM Online, dazu eine Vorschau auf den Compliance Checker.
Was BIM Online kann
- 01
Modelle importieren und vorbereiten
Ziehen Sie alle IFC-Dateien auf einmal hinein. BIM Online erkennt die Disziplin jeder Datei an ihrem Namen, sodass ein Brandschutz-Beratungsmodell als Information behandelt wird, nicht als Wände.
- Architektur-, Tragwerks- und TGA-Modelle zusammen
- Crop project blendet verirrte Elemente fern vom Gebäude aus
- Röntgenansicht, Schnittbox und Kategoriefilter für den Blick ins Innere
- 02
Die Informationen, die eine Abschottung braucht
Jedes Element trägt seine Orange Button Parameter: Bauart und Dicke, Feuerwiderstand sowie Art und Größe der Installation. BIM Online übernimmt, was es aus der IFC lesen kann; den Rest ergänzen Sie.
- Fehlende Werte auf einen Blick
- Typen aus einer Liste, Größen in Millimetern
- Ursprüngliche IFC-Eigenschaften schreibgeschützt erhalten
- 03
Die Checklist
Bevor Sie nach Clashes suchen, bekommt jede Wand, jede Decke und jede Installation eine Ampel. Senden Sie die Checklist als PDF an den Modellierer; wenn die verbesserten Modelle zurückkommen, aktualisiert sie sich von selbst.
- Grün vollständig, orange prüfenswert, rot fehlend
- PDF pro Datei und Kategorie
- Fehlende Werte selbst ergänzen
- 04
Kollisionsprüfung nach Regeln
Clashes werden nach festen Regeln für Wände, Decken und Aussparungen gefunden und pro Grundriss nummeriert. Ein Rohr durch eine dreischichtige Wand ist ein Clash, nicht drei.
- Geschosse und Grundrisse aus Ihrer IFC
- Nach Modelländerungen erneut ausführen: Update behält Ihre Prüfungen
- Jeden Clash freigeben oder entfernen, oder einen von Hand setzen
- 05
In großen Mengen vervollständigen
Der Data Manager zeigt die Clashlist genau so, wie sie an Office geht. Gruppieren, filtern und eine ganze Gruppe auf einmal ausfüllen, dann Clashes und MSPs nummerieren.
- Rote Zellen zeigen fehlende Informationen
- Eine Gruppe ausfüllen, jeder Clash folgt
- Nummerierung pro Ebene, mit eigenem Präfix
- 06
Engineering und der Compliance Checker
Brandschutzprodukte brauchen Platz. Engineering prüft jede Wand und Decke mit Durchführungen auf die von Ihnen festgelegten Abstände und hilft Ihnen zu lösen, was nicht passt.
- A zwischen Durchführungen, B zum Rand der Öffnung, C innerhalb einer Öffnung
- Durchführungen zu einer MSP zusammenfassen oder auseinanderrücken
- Engineering-Bericht: ein Plan pro Ebene und ein Blatt pro Wand
- 07
An Office und zurück zu BIM
Speichern Sie Entwürfe während der Arbeit und veröffentlichen Sie eine Version, wenn sie fertig ist. Laden Sie die Grundrisse und die Clash-Liste in Orange Button Office hoch, oder exportieren Sie die Clashes als IFC.
- Eine Warnung, bevor Sie unvollständige Clashes hochladen
- IFC-Export zum Reimport in Ihre BIM-Software
- Eine Videoanleitung in den meisten Panels
Neu · Compliance Checker
Jeder A-, B- und C-Abstand, automatisch geprüft.
Der Compliance Checker in OB BIM prüft alle Abstände zwischen Installationen und Öffnungen in Ihrem Projekt. In BIM Online finden Sie ihn unter Engineering. Er markiert jeden Verstoß, hilft bei der Lösung und erstellt einen Bericht, den Sie teilen können.
- AZwischen InstallationenMindestabstand zwischen Elementen, pro Elementtyp und Konstruktionskategorie.
- BZum Rand der ÖffnungMindestabstand jedes Elements zum Rand einer Öffnung oder Kombiabschottung.
- CInnerhalb einer ÖffnungMindestabstand zwischen Elementtypen innerhalb einer einzelnen Öffnung oder MSP.
Legen Sie eigene Abstandstabellen pro Brandschutzlösung fest, führen Sie die Prüfung für alle Clashes aus und exportieren Sie die Verstöße pro Konstruktion als PDF.Vorschau ansehen →
Ebenfalls verfügbar
Sie arbeiten lieber in Revit?
Die Revit Edition bringt dieselbe Clash-Engine in Autodesk Revit, zusammen mit OneClick apps, die die Routinearbeit aus der Brandschutzmodellierung nehmen.
- AperturesÖffnungen für jede Leitung in einem Durchgang prüfen und erstellen.
- KombiabschottungenLeitungen nach geprüften Regeln in einer Öffnung gruppieren.
- NumberingJede Abschottungsposition einheitlich nummerieren.
- BatchLinkMehrere Modelle auf einmal verknüpfen.
Revit Edition
Videos zur Revit Edition
Installieren Sie das Plugin, verknüpfen Sie Ihre Modelle und finden Sie die Clashes in Autodesk Revit, dazu die OneClick apps, die Ihnen die Routinearbeit abnehmen.
Fragen
Was ist ein Clash im Brandschutz?
Ein Clash ist eine Stelle, an der eine Leitung, etwa ein Rohr, ein Kanal oder eine Kabeltrasse, eine feuerwiderstandsfähige Wand oder Decke durchdringt. Jede dieser Öffnungen benötigt eine geprüfte Abschottung: eine zertifizierte Brandschutzlösung.
Kann Orange Button gegen Aussparungen prüfen?
Ja. Aussparungen (BWIC) im Modell nehmen an der Kollisionsprüfung teil. Jede Durchführung durch eine Öffnung wird automatisch erkannt und anhand der geprüften Systeme analysiert: Größe und Form der Öffnung, Abstand zum Rand und zwischen den Leitungen. Eine Öffnung mit zwei oder mehr Leitungen wird zu einer Kombiabschottung (MSP).
Wie werden Clashes gezählt?
Jede eindeutige Clash-Position zählt als ein Clash. Die ersten 200 im Monat sind kostenlos; darüber sinkt der Preis pro Clash mit wachsendem Volumen.
Brauche ich Autodesk Revit?
Nein. BIM Online läuft vollständig im Browser. Die Revit Edition ist für Teams gedacht, die bereits in Revit modellieren und die OneClick apps nutzen möchten.
