Orange Button BIM
Clash detection antincendio, direttamente nel browser.
BIM Online è la versione browser di Orange Button BIM. Importa i tuoi modelli IFC, controllali, trova ogni clash antincendio, misura le distanze e invia una Clashlist completa a Orange Button Office. Senza Revit e senza esperienza BIM.
Niente Revit
Tutto funziona nel browser, così anche gli specialisti antincendio senza software BIM possono iniziare subito.
Controllato prima dei clash
Una Checklist a semaforo mostra quali informazioni mancano nei modelli, prima di contare un solo clash.
Dritto in Office
Carica le planimetrie e la Clashlist in Orange Button Office, dove ogni clash riceve una soluzione certificata.
Provalo tu stesso
Esplora una demo di BIM Online.
Una demo semplificata con un piccolo progetto di esempio e due modelli IFC: controlla i dati, avvia il rilevamento delle interferenze e misura le distanze, in cinque passaggi, nel browser, senza account. Vuoi provare tutte le funzioni? Registrati ora gratis!
Sul telefono la demo si apre a schermo intero, in orizzontale. Chiudila in alto a destra.
La demo non può essere mostrata in questo browser. Guarda il video tour. Guarda il video tour →
Questa era una piccola parte di BIM Online.
Ora con i tuoi modelli: gratis fino a 200 clash al mese.
Varchi predisposti
Clash anche sui varchi predisposti, non solo su pareti e solai.
In molti progetti, e in quasi tutti i progetti nel Regno Unito, i varchi per gli impianti sono builders work in connection (BWIC): fori, manicotti e cavità realizzati prima della posa degli impianti. Orange Button BIM esegue i clash su questi varchi e individua e analizza automaticamente ogni attraversamento che li attraversa.
- 1Varchi come categoria di clashI varchi predisposti nel modello, come elementi void o opening, partecipano alla clash detection accanto a pareti, solai e lastre resistenti al fuoco.
- 2Ogni attraversamento individuatoOgni tubazione, condotta e passerella portacavi in un varco viene trovata automaticamente e collegata a quel varco.
- 3Analizzati rispetto ai sistemi testatiDimensione e forma del varco, distanza di ogni impianto dal bordo del varco e spazio tra gli impianti vengono verificati rispetto alle regole dei sistemi testati.
- 4Un varco, un MSPUn varco con due o più impianti diventa automaticamente un attraversamento misto, dimensionato sul varco e numerato nella Clashlist.
In BIM Online con i tuoi modelli IFC, e in Revit con l'app OneClick Apertures.
Guarda: Engineering, distanze e MSPVideo tour · BIM Online
Dai file IFC a una Clashlist completa.
Dodici brevi video: importa e verifica i tuoi modelli, trova e rivedi ogni clash, misura le distanze, invia il risultato a Orange Button Office e lavora con i varchi predisposti.
01Intro: cosa fa BIM Online
Leggi la trascrizione
01 Intro: cosa fa BIM Online
Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.
A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.
BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.
02 Accesso, la schermata e i tuoi file
When you open a project from Orange Button Office, you're signed in automatically. Let's look at the screen.
Top left is the toolbar with the main tools. Files. Data Manager. Clash Detection. Engineering. And Save & Export.
In the middle you'll find the floor plans. The Category Filter. And a search box.
In the top-right corner is the ViewCube. Next to it is your account menu, where you can switch between light and dark mode.
Start in the Files panel. Click Import IFC File and select all your models at once – or just drag them onto the screen.
BIM Online reads each file's discipline from its name: architectural, structural, plumbing, Advice and so on. Check it here. The discipline matters – an Advice file, for example, is treated as fire-rating information, not as real walls. If it's wrong, change it from the dropdown.
Sometimes a model contains one element kilometres away, so everything looks tiny. Use Crop project: BIM Online suggests a box around the real building. Adjust it and confirm. Elements outside are hidden and left out of clash detection.
In the next video you'll learn to move around the model.
03 Muoversi nel modello
A 3D model only helps if you can find your way around it. In this video you'll learn to move through the building, select elements and look inside – with the mouse, the view buttons and the filters.
The left mouse button orbits. The right mouse button pans. And the scroll wheel zooms towards whatever is under your cursor. You can zoom right through walls to get inside the building.
Hover over an element to see an orange outline and its name just below the top bar. If several elements sit behind each other, press Tab to step through them.
A single click does nothing – double-click to select. The element is highlighted, the view zooms to it and its properties open on the right. Double-click empty space to clear the selection.
Next to the ViewCube are three buttons. Reset view. And X-ray, which makes the construction files transparent so you can see the installations inside.
The third is the section box. With nothing selected it covers the whole project; with an element selected it boxes that element. Drag the handles to cut the model open.
Under the cube you switch between perspective and orthographic. Click X-ray and the section box again to switch them off.
The Category Filter shows or hides whole categories. The small square sets whether a category gets a solid fill where the section box cuts it. Click a category name to go one level deeper: every type in that category, each with its own visibility, colour and transparency. For example, give the pipes and ducts a bright colour. Then switch on X-ray to make the construction transparent – the installations stand out at once.
Finally, the search box. Type part of a name or a type code and everything that doesn't match fades out.
Next, we'll look at an element's properties and the Orange Button parameters.
04 Proprietà e parametri Orange Button
The Properties panel shows everything about the selected element. The top part is Orange Button: the information the firestop solution needs. Below are the original IFC properties from the model, which you can read but not change.
BIM Online fills in as much Orange Button data as it can from the IFC file. Where something is missing you'll see a dash. Hover a value and click to edit it – types are picked from a list, sizes you type in millimetres.
If no property gives a size, BIM Online measures the geometry and suggests a value. It never fills it in by itself – click Use if the suggestion is right.
Looking for a property? Use the search box at the top of the panel. Want to see an IFC property for all elements? Right-click it and add it to a Data Manager table.
Every kind of element has its own properties. A wall carries its fire rating and thickness. A pipe carries its system and diameter. With the Category Filter you show only the pipes. Hover one to see what it is.
Next, we'll set up the building storeys and floor plans.
05 Piani dell’edificio e planimetrie
Floor plans organise everything in BIM Online: clashes are numbered per level and the Clashlist is grouped by them. Before you run clash detection, open Building storeys & floor plans.
The storeys come from one of your IFC models. Choose which model to take them from – usually the architectural one. Then tick the storeys you need. Each ticked storey becomes a floor plan.
Each floor plan runs from a bottom level to a top level, taken from the storeys in the IFC. With the offsets you move those limits up or down. The cut plane sets the height at which the plan is cut – usually one and a half metres above the floor.
Need to see more or less of a level? Change its offsets here, and the floor plan follows at once. If you skip this dialog, BIM Online will ask you when you open the clash tools.
Pick a level from the dropdown to see its plan from above. Clashes show up as pins.
A floor plan has its own tools. The cube shows the plan as a 3D inspection view. Place Marker adds a clash by hand. And with the fire rating brush you click walls to give them a fire rating – Ctrl and the scroll wheel change the value. The eraser clears it again.
Choose All Levels to go back to 3D.
With the floor plans set up, the next step is to check the models, with the Checklist.
06 Verificare i modelli: la Checklist
Before you look for clashes, check whether the models contain the information a firestop solution needs. That's what the Checklist is for.
Every wall, floor and installation gets a row with a traffic light. Green is complete. Orange is worth a look. Red means required information is missing. The missing cells are coloured too.
In our usual process the checklist goes to the client first. Export it as a PDF from Save and Export. Per file and category it shows what's complete, so the modellers know what to improve.
When the improved models come back, import them again, and the checklist updates by itself.
Some information you can add yourself. Double-click a red cell and pick the right value. The traffic light turns green.
When the checklist is green, you're ready for clash detection.
07 Impostare ed eseguire la clash detection
Open Clash Detection. The first time you run it, an overview shows which categories take part. BIM Online sets sensible defaults based on your files, so you rarely need to change them.
Want to know exactly what counts as a clash? Click the info button. It explains the rules for walls, floors and openings, step by step.
When the models change, run detection again. Update keeps what you've already checked – marks, approvals and removed clashes – and adds what's new. Add only leaves every existing clash as it is. Replace starts over.
You can also run it for certain installation files only, and keep the existing clash numbers.
Click Run. On a big project this can take a few minutes, and you can cancel at any time. When it's done, every clash appears as a marker in the model and in the list.
Next, we'll review the clashes one by one.
08 Esaminare i clash
The Clash panel lists every clash, grouped by construction or by floor plan. Use the filters to narrow it down – for example, only floors, or only ducts.
Open a group and BIM Online cuts the model around that wall so you see just its clashes. Check each one. Tick it to approve – the marker turns green. Not a real clash? Remove it; you'll find it back under Removed.
BIM Online combines what belongs together: a pipe through a wall with three layers is one clash, not three. The badge shows how many elements were combined. Click it to see exactly what's inside, and separate an element if it shouldn't be there.
In 3D every clash has a sphere, an outline on both faces of the wall and a flag with its number. Right-click a clash for all its actions – including moving it within its wall.
Missing a clash? Use Place manual clash and click the spot. Working on an apartment building where only one apartment is modelled? Copy its clashes, then paste them in the other apartments – rotate with R, mirror with M – or paste them to several levels at once with To levels. Copied and manual clashes are kept when you run detection again.
You can also check the clashes on a floor plan. Pick a level: every clash is a pin. Click a pin to select that clash.
Once every clash is checked, the next step is to complete their information – in the Data Manager.
09 Il Data Manager
The Data Manager is where you check and complete information in bulk. On the left are your tables.
You know the Checklist from the previous video. Here we look at the other tables, starting with the Clashlist.
The Clashlist is exactly what will be sent to Orange Button Office – every row is a clash. Click a row to find the clash in 3D, or switch to In view to see only the clashes you're looking at.
A red cell means a clash is still missing information. Double-click it, pick the right value, and the traffic light follows.
Use the toolbar to choose columns, add filters and group or sort. Grouping by installation type, for example, shows every type once. Fill in a group, and every clash in it follows. Like the result? Store it as a schedule of your own.
Number your clashes from the Number button. Choose a prefix and start number, limit it to certain levels or sections if you like, and run. Clashes and MSPs are numbered separately.
Press the i button for all keyboard shortcuts. And under Stored Sections you keep the section boxes you want to come back to.
In the next video, Engineering checks the space around your penetrations.
10 Engineering: distanze e MSP
Firestop products need space around them. Engineering measures that space for every wall and floor with penetrations. There are three distances. A: between penetrations. B: from a penetration to the edge of an opening or block. C: between services inside one opening or block. Set the required values in Settings – per construction type or installation type.
Click Measure distances. When it's done, every wall and floor with penetrations is listed per level. The red number shows how many problems each one has.
Open a wall to see where the problem is. Here two pipes are only 60 millimetres apart, where 100 is needed. There are two ways to fix it. Combine them into one MSP – a multi-service penetration, sealed as one block. Or move the penetrations further apart in the model.
The Engineering viewer shows each wall in detail. Front, side and top views with dimensions. The 3D model. And the floor plan. You can draw or adjust MSP boxes, measure, and leave comments. Then mark the wall as approved.
Approving an MSP numbers it and adds it to the Clashlist as one block. Openings that hold two or more clashes become an approved MSP automatically. Back in the 3D view, Place suggested MSPs does this for every wall at once. When you're done, export the engineering report: per level a plan, then one sheet per wall with all views, sizes and comments.
Next, we'll save the project and send the result to Orange Button Office.
11 Salvare, esportare, aiuto e conclusione
Everything is saved through Save & Export. Save a draft to the server with Ctrl+S while you work; publish a version when it's ready for others.
Then send the result to Orange Button Office: upload the floor plans, then the Clashlist. Before uploading, BIM Online warns you if clashes are missing information needed to find a solution. You can still upload, but it's better to fix it first.
Need the clashes back in your BIM software? Export them as IFC – a full file you can re-import, or a quotation or engineering deliverable.
Stuck? Most panels have a video button with a short guide.
That's BIM Online: import, check, detect, complete, engineer and upload. In one more video, we look at how BIM Online works with BWIC openings.
12 Varchi predisposti per gli impianti (BWIC)
In the UK, the openings for services are often designed before the firestops: builder's work in connection, or BWIC. When those openings are in the model, BIM Online puts them to work.
Open the Data Manager and choose Openings. Every opening in the model is listed, with its number, its shape and its size. The number is taken from the opening's own Mark.
To link them to the clashes, open Clash Detection and click Re-run. Under Clash settings, tick Data for Openings: an opening then gives its number and size to the clash it sits in.
Then choose Opening information only. Your clashes stay as they are; only the opening at each clash is looked up. BIM Online shows what it found before you apply it.
In the Clashlist, add the Opening Number and MSP columns. Where two or more services pass through the same opening, it becomes an MSP: a multi-service penetration, sealed as one block.
So the Clashlist shows at a glance which services pass through which opening.
Engineering uses the same openings. Its wall views show each opening with the services inside, so the firestop design matches the builder's work on site.
So the openings, the clashes and the firestops line up: one Clashlist that tells the builder, the installer and the firestop specialist the same thing.
In the UK, the Building Safety Act asks for a golden thread: for higher-risk buildings, every opening must be traceable from early design to the work on site. Orange Button covers that whole thread. The opening is designed and checked here, in BIM Online. Orange Button Office picks the certified firestop. And on site, the installer records it in the Field app, with a photo and a status.
Thanks for watching.
BIM Online
Brevi video per pannello
Un breve video per ogni pannello di BIM Online, più un'anteprima del Compliance Checker.
Cosa fa BIM Online
- 01
Importa e prepara i tuoi modelli
Trascina tutti i tuoi file IFC in una volta. BIM Online ricava la disciplina di ogni file dal nome, così un modello con le indicazioni di resistenza al fuoco viene trattato come informazione, non come pareti.
- Modelli architettonici, strutturali e impiantistici insieme
- Crop project per nascondere elementi isolati lontani dall'edificio
- Raggi X, section box e filtro per categoria per guardare dentro
- 02
Le informazioni che servono a una sigillatura
Ogni elemento ha i suoi parametri Orange Button: tipo e spessore della costruzione, resistenza al fuoco, tipo e dimensione dell'impianto. BIM Online compila ciò che può dall'IFC; tu completi il resto.
- Valori mancanti visibili a colpo d'occhio
- Tipi scelti da un elenco, dimensioni in millimetri
- Proprietà IFC originali mantenute in sola lettura
- 03
La Checklist
Prima di cercare i clash, ogni parete, solaio e impianto riceve un semaforo. Invia la Checklist al modellatore in PDF; quando tornano i modelli migliorati, si aggiorna da sola.
- Verde completo, arancione da verificare, rosso mancante
- PDF per file e categoria
- Compila tu stesso i valori mancanti
- 04
Clash detection basata su regole
I clash vengono trovati con regole fisse per pareti, solai e varchi predisposti, e numerati per planimetria. Una tubazione attraverso una parete a tre strati è un clash, non tre.
- Piani dell'edificio e planimetrie dal tuo IFC
- Riesegui dopo le modifiche al modello: Update mantiene i tuoi controlli
- Approva o rimuovi ogni clash, oppure posizionane uno a mano
- 05
Completa in blocco
Il Data Manager mostra la Clashlist esattamente come arriva in Office. Raggruppa, filtra e compila un intero gruppo in una volta, poi numera i tuoi clash e MSP.
- Le celle rosse indicano informazioni mancanti
- Compili un gruppo, ogni clash si adegua
- Numerazione per livello, con il tuo prefisso
- 06
Engineering e il Compliance Checker
I prodotti antincendio hanno bisogno di spazio. Engineering misura ogni parete e solaio con attraversamenti rispetto alle distanze che imposti e ti aiuta a risolvere ciò che non ci sta.
- A tra gli attraversamenti, B dal bordo del varco, C all'interno di un varco
- Unisci gli attraversamenti in un MSP o distanziali
- Report Engineering: una pianta per livello e una scheda per parete
- 07
Verso Office, e ritorno al BIM
Salva bozze mentre lavori e pubblica una versione quando è pronta. Carica le planimetrie e la Clashlist in Orange Button Office, oppure esporta i clash in IFC.
- Un avviso prima di caricare clash incompleti
- Export IFC da reimportare nel tuo software BIM
- Una video guida nella maggior parte dei pannelli
Novità · Compliance Checker
Ogni distanza A, B e C, verificata automaticamente.
Il Compliance Checker di OB BIM verifica tutte le distanze tra impianti e varchi nel tuo progetto. In BIM Online lo trovi sotto Engineering. Segnala ogni violazione, ti aiuta a risolverla e genera un report da condividere.
- ATra gli impiantiDistanza minima tra gli elementi, per tipo di elemento e categoria costruttiva.
- BDal bordo del varcoDistanza minima di ogni elemento dal bordo di un varco o di un attraversamento misto.
- CAll'interno di un varcoDistanza minima tra tipi di elemento all'interno di un singolo varco o MSP.
Imposta le tue tabelle delle distanze per ogni soluzione antincendio, esegui la verifica su tutti i clash ed esporta le violazioni per elemento costruttivo in PDF.Guarda l'anteprima →
Disponibile anche
Preferisci lavorare in Revit?
La Revit Edition porta lo stesso motore clash in Autodesk Revit, insieme alle app OneClick che eliminano il lavoro ripetitivo dalla modellazione antincendio.
- AperturesControlla e crea i varchi per ogni impianto in un colpo solo.
- Attraversamenti mistiRaggruppa gli impianti in un unico varco secondo regole testate.
- NumberingNumera ogni posizione di sigillatura in modo coerente.
- BatchLinkCollega più modelli in una volta.
Revit Edition
Video per la Revit Edition
Installa il plugin, collega i tuoi modelli e trova i clash antincendio in Autodesk Revit, con le app OneClick che eliminano il lavoro ripetitivo.
Domande
Cos'è un clash antincendio?
Un clash antincendio è un punto in cui un impianto, come una tubazione, una condotta o una passerella portacavi, attraversa una parete o un solaio resistente al fuoco. Ognuno di questi varchi richiede una sigillatura testata: una soluzione antincendio certificata.
Orange Button può eseguire i clash sui varchi predisposti?
Sì. I varchi predisposti (BWIC) nel modello partecipano alla clash detection. Ogni attraversamento in un varco viene individuato automaticamente e analizzato rispetto ai sistemi testati: dimensione e forma del varco, distanza dal bordo e tra gli impianti. Un varco con due o più impianti diventa un unico attraversamento misto (MSP).
Come vengono contati i clash?
Ogni posizione di clash univoca conta come un clash. I primi 200 al mese sono gratis; oltre, il prezzo per clash scende all'aumentare del volume.
Mi serve Autodesk Revit?
No. BIM Online funziona interamente nel browser. La Revit Edition è pensata per i team che già modellano in Revit e vogliono le app OneClick.
