Orange Button BIM
La détection de conflits coupe-feu, directement dans votre navigateur.
BIM Online est l'édition navigateur d'Orange Button BIM. Importez vos maquettes IFC, contrôlez-les, trouvez chaque clash coupe-feu, mesurez les distances et envoyez une liste de clashs complète vers Orange Button Office. Ni Revit ni expérience BIM nécessaires.
Pas besoin de Revit
Tout fonctionne dans le navigateur : les spécialistes du calfeutrement sans logiciel BIM peuvent démarrer immédiatement.
Contrôlé avant les clashs
Une checklist en feux tricolores indique les informations manquantes dans les maquettes, avant même de compter un seul clash.
Directement vers Office
Importez les plans et la liste de clashs dans Orange Button Office, où chaque clash reçoit une solution certifiée.
Essayez vous-même
Parcourez une démo de BIM Online.
Une démo simplifiée avec un petit projet d’exemple et deux maquettes IFC : vérifiez les données, lancez la détection des clashs et mesurez les distances, en cinq étapes, dans votre navigateur, sans compte. Envie d’essayer toutes les fonctions ? Inscrivez-vous gratuitement !
Sur téléphone, la démo s’ouvre en plein écran, en paysage. Fermez-la en haut à droite.
La démo ne peut pas s’afficher dans ce navigateur. Regardez la visite vidéo. Voir la visite vidéo →
C’était une petite partie de BIM Online.
Maintenant avec vos propres maquettes : gratuit jusqu’à 200 clashs par mois.
Réservations
Des clashs avec les réservations, pas seulement les parois et planchers.
Sur de nombreux projets, et sur presque tous les projets au Royaume-Uni, les ouvertures pour les réseaux sont des réservations (builders work in connection, BWIC) : trous, fourreaux et trémies réalisés avant la pose des réseaux. Orange Button BIM détecte les clashs avec ces réservations et identifie et analyse automatiquement chaque traversée qui les franchit.
- 1Les réservations comme catégorie de clashLes réservations de la maquette, sous forme d'éléments void ou opening, participent à la détection de conflits aux côtés des parois, des planchers et des plaques coupe-feu.
- 2Chaque traversée identifiéeChaque tuyau, gaine et chemin de câbles passant par une réservation est trouvé automatiquement et lié à cette réservation.
- 3Analysée par rapport aux systèmes testésLa taille et la forme de la réservation, la distance de chaque réseau au bord de la réservation et l'espace entre les réseaux sont vérifiés selon les règles des systèmes testés.
- 4Une réservation, un MSPUne réservation avec deux réseaux ou plus devient automatiquement un calfeutrement de trémie, dimensionné à la réservation et numéroté dans la liste de clashs.
Dans BIM Online avec vos maquettes IFC, et dans Revit avec la OneClick app Apertures.
Voir : Engineering, distances et MSPVisite vidéo · BIM Online
Des fichiers IFC à une liste de clashs complète.
Douze courtes vidéos : importez et vérifiez vos maquettes, trouvez et vérifiez chaque clash, mesurez les distances, envoyez le résultat vers Orange Button Office et travaillez avec les réservations.
01Intro : ce que fait BIM Online
Lire la transcription
01 Intro : ce que fait BIM Online
Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.
A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.
BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.
02 Connexion, l’écran et vos fichiers
When you open a project from Orange Button Office, you're signed in automatically. Let's look at the screen.
Top left is the toolbar with the main tools. Files. Data Manager. Clash Detection. Engineering. And Save & Export.
In the middle you'll find the floor plans. The Category Filter. And a search box.
In the top-right corner is the ViewCube. Next to it is your account menu, where you can switch between light and dark mode.
Start in the Files panel. Click Import IFC File and select all your models at once – or just drag them onto the screen.
BIM Online reads each file's discipline from its name: architectural, structural, plumbing, Advice and so on. Check it here. The discipline matters – an Advice file, for example, is treated as fire-rating information, not as real walls. If it's wrong, change it from the dropdown.
Sometimes a model contains one element kilometres away, so everything looks tiny. Use Crop project: BIM Online suggests a box around the real building. Adjust it and confirm. Elements outside are hidden and left out of clash detection.
In the next video you'll learn to move around the model.
03 Naviguer dans la maquette
A 3D model only helps if you can find your way around it. In this video you'll learn to move through the building, select elements and look inside – with the mouse, the view buttons and the filters.
The left mouse button orbits. The right mouse button pans. And the scroll wheel zooms towards whatever is under your cursor. You can zoom right through walls to get inside the building.
Hover over an element to see an orange outline and its name just below the top bar. If several elements sit behind each other, press Tab to step through them.
A single click does nothing – double-click to select. The element is highlighted, the view zooms to it and its properties open on the right. Double-click empty space to clear the selection.
Next to the ViewCube are three buttons. Reset view. And X-ray, which makes the construction files transparent so you can see the installations inside.
The third is the section box. With nothing selected it covers the whole project; with an element selected it boxes that element. Drag the handles to cut the model open.
Under the cube you switch between perspective and orthographic. Click X-ray and the section box again to switch them off.
The Category Filter shows or hides whole categories. The small square sets whether a category gets a solid fill where the section box cuts it. Click a category name to go one level deeper: every type in that category, each with its own visibility, colour and transparency. For example, give the pipes and ducts a bright colour. Then switch on X-ray to make the construction transparent – the installations stand out at once.
Finally, the search box. Type part of a name or a type code and everything that doesn't match fades out.
Next, we'll look at an element's properties and the Orange Button parameters.
04 Propriétés et paramètres Orange Button
The Properties panel shows everything about the selected element. The top part is Orange Button: the information the firestop solution needs. Below are the original IFC properties from the model, which you can read but not change.
BIM Online fills in as much Orange Button data as it can from the IFC file. Where something is missing you'll see a dash. Hover a value and click to edit it – types are picked from a list, sizes you type in millimetres.
If no property gives a size, BIM Online measures the geometry and suggests a value. It never fills it in by itself – click Use if the suggestion is right.
Looking for a property? Use the search box at the top of the panel. Want to see an IFC property for all elements? Right-click it and add it to a Data Manager table.
Every kind of element has its own properties. A wall carries its fire rating and thickness. A pipe carries its system and diameter. With the Category Filter you show only the pipes. Hover one to see what it is.
Next, we'll set up the building storeys and floor plans.
05 Niveaux et plans d’étage
Floor plans organise everything in BIM Online: clashes are numbered per level and the Clashlist is grouped by them. Before you run clash detection, open Building storeys & floor plans.
The storeys come from one of your IFC models. Choose which model to take them from – usually the architectural one. Then tick the storeys you need. Each ticked storey becomes a floor plan.
Each floor plan runs from a bottom level to a top level, taken from the storeys in the IFC. With the offsets you move those limits up or down. The cut plane sets the height at which the plan is cut – usually one and a half metres above the floor.
Need to see more or less of a level? Change its offsets here, and the floor plan follows at once. If you skip this dialog, BIM Online will ask you when you open the clash tools.
Pick a level from the dropdown to see its plan from above. Clashes show up as pins.
A floor plan has its own tools. The cube shows the plan as a 3D inspection view. Place Marker adds a clash by hand. And with the fire rating brush you click walls to give them a fire rating – Ctrl and the scroll wheel change the value. The eraser clears it again.
Choose All Levels to go back to 3D.
With the floor plans set up, the next step is to check the models, with the Checklist.
06 Contrôler les maquettes : la Checklist
Before you look for clashes, check whether the models contain the information a firestop solution needs. That's what the Checklist is for.
Every wall, floor and installation gets a row with a traffic light. Green is complete. Orange is worth a look. Red means required information is missing. The missing cells are coloured too.
In our usual process the checklist goes to the client first. Export it as a PDF from Save and Export. Per file and category it shows what's complete, so the modellers know what to improve.
When the improved models come back, import them again, and the checklist updates by itself.
Some information you can add yourself. Double-click a red cell and pick the right value. The traffic light turns green.
When the checklist is green, you're ready for clash detection.
07 Paramétrer et lancer la détection de clashs
Open Clash Detection. The first time you run it, an overview shows which categories take part. BIM Online sets sensible defaults based on your files, so you rarely need to change them.
Want to know exactly what counts as a clash? Click the info button. It explains the rules for walls, floors and openings, step by step.
When the models change, run detection again. Update keeps what you've already checked – marks, approvals and removed clashes – and adds what's new. Add only leaves every existing clash as it is. Replace starts over.
You can also run it for certain installation files only, and keep the existing clash numbers.
Click Run. On a big project this can take a few minutes, and you can cancel at any time. When it's done, every clash appears as a marker in the model and in the list.
Next, we'll review the clashes one by one.
08 Examiner les clashs
The Clash panel lists every clash, grouped by construction or by floor plan. Use the filters to narrow it down – for example, only floors, or only ducts.
Open a group and BIM Online cuts the model around that wall so you see just its clashes. Check each one. Tick it to approve – the marker turns green. Not a real clash? Remove it; you'll find it back under Removed.
BIM Online combines what belongs together: a pipe through a wall with three layers is one clash, not three. The badge shows how many elements were combined. Click it to see exactly what's inside, and separate an element if it shouldn't be there.
In 3D every clash has a sphere, an outline on both faces of the wall and a flag with its number. Right-click a clash for all its actions – including moving it within its wall.
Missing a clash? Use Place manual clash and click the spot. Working on an apartment building where only one apartment is modelled? Copy its clashes, then paste them in the other apartments – rotate with R, mirror with M – or paste them to several levels at once with To levels. Copied and manual clashes are kept when you run detection again.
You can also check the clashes on a floor plan. Pick a level: every clash is a pin. Click a pin to select that clash.
Once every clash is checked, the next step is to complete their information – in the Data Manager.
09 Le Data Manager
The Data Manager is where you check and complete information in bulk. On the left are your tables.
You know the Checklist from the previous video. Here we look at the other tables, starting with the Clashlist.
The Clashlist is exactly what will be sent to Orange Button Office – every row is a clash. Click a row to find the clash in 3D, or switch to In view to see only the clashes you're looking at.
A red cell means a clash is still missing information. Double-click it, pick the right value, and the traffic light follows.
Use the toolbar to choose columns, add filters and group or sort. Grouping by installation type, for example, shows every type once. Fill in a group, and every clash in it follows. Like the result? Store it as a schedule of your own.
Number your clashes from the Number button. Choose a prefix and start number, limit it to certain levels or sections if you like, and run. Clashes and MSPs are numbered separately.
Press the i button for all keyboard shortcuts. And under Stored Sections you keep the section boxes you want to come back to.
In the next video, Engineering checks the space around your penetrations.
10 Engineering : distances et MSP
Firestop products need space around them. Engineering measures that space for every wall and floor with penetrations. There are three distances. A: between penetrations. B: from a penetration to the edge of an opening or block. C: between services inside one opening or block. Set the required values in Settings – per construction type or installation type.
Click Measure distances. When it's done, every wall and floor with penetrations is listed per level. The red number shows how many problems each one has.
Open a wall to see where the problem is. Here two pipes are only 60 millimetres apart, where 100 is needed. There are two ways to fix it. Combine them into one MSP – a multi-service penetration, sealed as one block. Or move the penetrations further apart in the model.
The Engineering viewer shows each wall in detail. Front, side and top views with dimensions. The 3D model. And the floor plan. You can draw or adjust MSP boxes, measure, and leave comments. Then mark the wall as approved.
Approving an MSP numbers it and adds it to the Clashlist as one block. Openings that hold two or more clashes become an approved MSP automatically. Back in the 3D view, Place suggested MSPs does this for every wall at once. When you're done, export the engineering report: per level a plan, then one sheet per wall with all views, sizes and comments.
Next, we'll save the project and send the result to Orange Button Office.
11 Enregistrer, exporter, aide et conclusion
Everything is saved through Save & Export. Save a draft to the server with Ctrl+S while you work; publish a version when it's ready for others.
Then send the result to Orange Button Office: upload the floor plans, then the Clashlist. Before uploading, BIM Online warns you if clashes are missing information needed to find a solution. You can still upload, but it's better to fix it first.
Need the clashes back in your BIM software? Export them as IFC – a full file you can re-import, or a quotation or engineering deliverable.
Stuck? Most panels have a video button with a short guide.
That's BIM Online: import, check, detect, complete, engineer and upload. In one more video, we look at how BIM Online works with BWIC openings.
12 Réservations pour réseaux (BWIC)
In the UK, the openings for services are often designed before the firestops: builder's work in connection, or BWIC. When those openings are in the model, BIM Online puts them to work.
Open the Data Manager and choose Openings. Every opening in the model is listed, with its number, its shape and its size. The number is taken from the opening's own Mark.
To link them to the clashes, open Clash Detection and click Re-run. Under Clash settings, tick Data for Openings: an opening then gives its number and size to the clash it sits in.
Then choose Opening information only. Your clashes stay as they are; only the opening at each clash is looked up. BIM Online shows what it found before you apply it.
In the Clashlist, add the Opening Number and MSP columns. Where two or more services pass through the same opening, it becomes an MSP: a multi-service penetration, sealed as one block.
So the Clashlist shows at a glance which services pass through which opening.
Engineering uses the same openings. Its wall views show each opening with the services inside, so the firestop design matches the builder's work on site.
So the openings, the clashes and the firestops line up: one Clashlist that tells the builder, the installer and the firestop specialist the same thing.
In the UK, the Building Safety Act asks for a golden thread: for higher-risk buildings, every opening must be traceable from early design to the work on site. Orange Button covers that whole thread. The opening is designed and checked here, in BIM Online. Orange Button Office picks the certified firestop. And on site, the installer records it in the Field app, with a photo and a status.
Thanks for watching.
BIM Online
Courtes vidéos par panneau
Une courte vidéo pour chaque panneau de BIM Online, plus un aperçu du Compliance Checker.
Ce que fait BIM Online
- 01
Importer et préparer vos maquettes
Déposez tous vos fichiers IFC en une fois. BIM Online déduit la discipline de chaque fichier à partir de son nom : une maquette d'avis de résistance au feu est traitée comme information, pas comme des parois.
- Maquettes architecture, structure et CVC-plomberie-électricité ensemble
- Crop project pour masquer les éléments isolés loin du bâtiment
- Mode rayons X, boîte de coupe et filtre par catégorie pour voir à l'intérieur
- 02
Les informations nécessaires à un calfeutrement
Chaque élément porte ses paramètres Orange Button : type et épaisseur de construction, degré de résistance au feu, type et dimension d'installation. BIM Online renseigne ce qu'il peut depuis l'IFC ; vous complétez le reste.
- Valeurs manquantes visibles en un coup d'œil
- Types choisis dans une liste, dimensions en millimètres
- Propriétés IFC d'origine conservées en lecture seule
- 03
La Checklist
Avant de chercher les clashs, chaque paroi, plancher et installation reçoit un feu tricolore. Envoyez la checklist au modeleur en PDF ; quand les maquettes corrigées reviennent, elle se met à jour toute seule.
- Vert complet, orange à vérifier, rouge manquant
- PDF par fichier et par catégorie
- Complétez vous-même les valeurs manquantes
- 04
Détection de conflits par règles
Les clashs sont détectés selon des règles fixes pour les parois, les planchers et les réservations, et numérotés par plan. Un tuyau à travers une paroi à trois couches est un seul clash, pas trois.
- Niveaux et plans issus de votre IFC
- Relancez après des modifications de maquette : Update conserve vos vérifications
- Approuvez ou supprimez chaque clash, ou placez-en un manuellement
- 05
Complétez en masse
Le Data Manager affiche la Clashlist exactement telle qu'elle part vers Office. Regroupez, filtrez et complétez tout un groupe à la fois, puis numérotez vos clashs et vos MSP.
- Les cellules rouges signalent les informations manquantes
- Complétez un groupe, chaque clash suit
- Numérotation par niveau, avec votre propre préfixe
- 06
Engineering et le Compliance Checker
Les produits de calfeutrement ont besoin d'espace. Engineering mesure chaque paroi et chaque plancher comportant des traversées par rapport aux distances que vous définissez, et vous aide à résoudre ce qui ne rentre pas.
- A entre traversées, B jusqu'au bord de la réservation, C à l'intérieur d'une réservation
- Regroupez des traversées en un MSP, ou écartez-les
- Rapport Engineering : un plan par niveau et une fiche par paroi
- 07
Vers Office, et retour au BIM
Enregistrez des brouillons en cours de travail et publiez une version quand elle est prête. Importez les plans et la liste de clashs dans Orange Button Office, ou exportez les clashs en IFC.
- Un avertissement avant d'importer des clashs incomplets
- Export IFC à réimporter dans votre logiciel BIM
- Un guide vidéo dans la plupart des panneaux
Nouveau · Compliance Checker
Chaque distance A, B et C, vérifiée automatiquement.
Le Compliance Checker d’OB BIM vérifie toutes les distances entre installations et ouvertures de votre projet. Dans BIM Online, vous le trouvez sous Engineering. Il signale chaque non-conformité, vous aide à la résoudre et produit un rapport à partager.
- AEntre installationsDistance minimale entre éléments, par type d’élément et catégorie de paroi.
- BJusqu’au bord de l’ouvertureDistance minimale entre chaque élément et le bord d’une ouverture ou d’un calfeutrement de trémie.
- CDans une même ouvertureDistance minimale entre types d’éléments dans une même ouverture ou un MSP.
Définissez vos propres tableaux de distances par solution coupe-feu, lancez le contrôle sur tous les clashs et exportez les non-conformités par paroi en PDF.Voir l’aperçu →
Également disponible
Vous préférez travailler dans Revit ?
La Revit Edition apporte le même moteur de clashs dans Autodesk Revit, avec des OneClick apps qui suppriment le travail répétitif de la modélisation des calfeutrements.
- AperturesContrôlez et créez les réservations de tous les réseaux en une fois.
- Calfeutrements de trémieRegroupez les réseaux dans une seule réservation selon des règles testées.
- NumberingNumérotez chaque emplacement de calfeutrement de façon cohérente.
- BatchLinkLiez un lot de maquettes en une fois.
Revit Edition
Vidéos de la Revit Edition
Installez le plugin, liez vos maquettes et trouvez les clashs coupe-feu dans Autodesk Revit, avec les OneClick apps qui suppriment le travail répétitif.
Questions
Qu'est-ce qu'un clash coupe-feu ?
Un clash coupe-feu est un endroit où un réseau, comme un tuyau, une gaine ou un chemin de câbles, traverse une paroi ou un plancher coupe-feu. Chacune de ces ouvertures nécessite un calfeutrement testé : une solution coupe-feu certifiée.
Orange Button détecte-t-il les clashs avec les réservations ?
Oui. Les réservations (BWIC) de la maquette participent à la détection de conflits. Chaque traversée d'une réservation est identifiée automatiquement et analysée par rapport aux systèmes testés : taille et forme de la réservation, distance au bord et entre réseaux. Une réservation avec deux réseaux ou plus devient un seul calfeutrement de trémie (MSP).
Comment les clashs sont-ils comptés ?
Chaque position de clash unique compte comme un clash. Les 200 premiers de chaque mois sont gratuits ; au-delà, le prix par clash baisse à mesure que votre volume augmente.
Ai-je besoin d'Autodesk Revit ?
Non. BIM Online fonctionne entièrement dans votre navigateur. La Revit Edition s'adresse aux équipes qui modélisent déjà dans Revit et veulent les OneClick apps.
