Orange Button BIM
Detección de clashes de sellado cortafuego, en tu navegador.
BIM Online es la edición para navegador de Orange Button BIM. Importa tus modelos IFC, compruébalos, encuentra cada clash, mide las distancias y envía una Clashlist completa a Orange Button Office. Sin Revit y sin experiencia en BIM.
Sin necesidad de Revit
Todo funciona en el navegador, así que los especialistas en protección pasiva sin software BIM pueden empezar enseguida.
Comprobado antes de buscar clashes
Una Checklist tipo semáforo muestra qué información falta en los modelos, antes de contar un solo clash.
Directo a Office
Sube los planos y la Clashlist a Orange Button Office, donde cada clash recibe una solución certificada.
Pruébalo tú mismo
Recorre una demo de BIM Online.
Una demo simplificada con un pequeño proyecto de ejemplo y dos modelos IFC: comprueba los datos, ejecuta la detección de interferencias y mide las distancias, en cinco pasos, en tu navegador, sin cuenta. ¿Quieres probar todas las funciones? ¡Regístrate ahora gratis!
En el móvil, la demo se abre a pantalla completa y en horizontal. Ciérrala arriba a la derecha.
La demo no se puede mostrar en este navegador. Mira el vídeo tour. Ver el vídeo tour →
Esto era una pequeña parte de BIM Online.
Ahora con tus propios modelos: gratis hasta 200 clashes al mes.
Huecos previstos
Clashes contra huecos previstos, no solo contra paredes y forjados.
En muchos proyectos, y en casi todos en el Reino Unido, los huecos para instalaciones son builders work in connection (BWIC): agujeros, pasamuros y huecos formados antes de colocar las instalaciones. Orange Button BIM busca clashes contra esos huecos e identifica y analiza automáticamente cada paso que los atraviesa.
- 1Huecos como categoría de clashLos huecos previstos del modelo, como elementos void u opening, participan en la detección de clashes junto a paredes, forjados y placas resistentes al fuego.
- 2Cada paso identificadoCada tubería, conducto y bandeja portacables que atraviesa un hueco se encuentra automáticamente y se vincula a ese hueco.
- 3Analizado frente a sistemas ensayadosEl tamaño y la forma del hueco, la distancia de cada instalación al borde del hueco y el espacio entre instalaciones se comprueban con las reglas de los sistemas ensayados.
- 4Un hueco, un MSPUn hueco con dos o más instalaciones se convierte automáticamente en un paso mixto, dimensionado según el hueco y numerado en la Clashlist.
En BIM Online con tus modelos IFC, y en Revit con la OneClick app Apertures.
Ver: Engineering, distancias y MSPTour en vídeo · BIM Online
De archivos IFC a una clashlist completa.
Doce vídeos cortos: importa y comprueba tus modelos, encuentra y revisa cada clash, mide las distancias, envía el resultado a Orange Button Office y trabaja con huecos previstos.
01Intro: qué hace BIM Online
Leer la transcripción
01 Intro: qué hace BIM Online
Welcome to BIM Online, the Orange Button viewer for IFC models. In this video you'll learn how to go from a set of IFC files to a complete Clashlist.
A clash is a spot where an installation – a pipe, a duct or a cable tray – passes through a construction, like a wall or a floor. Every clash needs a firestop solution. To find that solution, each clash needs the right Orange Button information: the construction type and thickness, the fire rating, and the installation type and size.
BIM Online finds the clashes for you, helps you fill in that information, checks the distances between penetrations, and sends the result to Orange Button Office. Let's walk through it step by step.
02 Acceso, la pantalla y tus archivos
When you open a project from Orange Button Office, you're signed in automatically. Let's look at the screen.
Top left is the toolbar with the main tools. Files. Data Manager. Clash Detection. Engineering. And Save & Export.
In the middle you'll find the floor plans. The Category Filter. And a search box.
In the top-right corner is the ViewCube. Next to it is your account menu, where you can switch between light and dark mode.
Start in the Files panel. Click Import IFC File and select all your models at once – or just drag them onto the screen.
BIM Online reads each file's discipline from its name: architectural, structural, plumbing, Advice and so on. Check it here. The discipline matters – an Advice file, for example, is treated as fire-rating information, not as real walls. If it's wrong, change it from the dropdown.
Sometimes a model contains one element kilometres away, so everything looks tiny. Use Crop project: BIM Online suggests a box around the real building. Adjust it and confirm. Elements outside are hidden and left out of clash detection.
In the next video you'll learn to move around the model.
03 Moverse por el modelo
A 3D model only helps if you can find your way around it. In this video you'll learn to move through the building, select elements and look inside – with the mouse, the view buttons and the filters.
The left mouse button orbits. The right mouse button pans. And the scroll wheel zooms towards whatever is under your cursor. You can zoom right through walls to get inside the building.
Hover over an element to see an orange outline and its name just below the top bar. If several elements sit behind each other, press Tab to step through them.
A single click does nothing – double-click to select. The element is highlighted, the view zooms to it and its properties open on the right. Double-click empty space to clear the selection.
Next to the ViewCube are three buttons. Reset view. And X-ray, which makes the construction files transparent so you can see the installations inside.
The third is the section box. With nothing selected it covers the whole project; with an element selected it boxes that element. Drag the handles to cut the model open.
Under the cube you switch between perspective and orthographic. Click X-ray and the section box again to switch them off.
The Category Filter shows or hides whole categories. The small square sets whether a category gets a solid fill where the section box cuts it. Click a category name to go one level deeper: every type in that category, each with its own visibility, colour and transparency. For example, give the pipes and ducts a bright colour. Then switch on X-ray to make the construction transparent – the installations stand out at once.
Finally, the search box. Type part of a name or a type code and everything that doesn't match fades out.
Next, we'll look at an element's properties and the Orange Button parameters.
04 Propiedades y parámetros de Orange Button
The Properties panel shows everything about the selected element. The top part is Orange Button: the information the firestop solution needs. Below are the original IFC properties from the model, which you can read but not change.
BIM Online fills in as much Orange Button data as it can from the IFC file. Where something is missing you'll see a dash. Hover a value and click to edit it – types are picked from a list, sizes you type in millimetres.
If no property gives a size, BIM Online measures the geometry and suggests a value. It never fills it in by itself – click Use if the suggestion is right.
Looking for a property? Use the search box at the top of the panel. Want to see an IFC property for all elements? Right-click it and add it to a Data Manager table.
Every kind of element has its own properties. A wall carries its fire rating and thickness. A pipe carries its system and diameter. With the Category Filter you show only the pipes. Hover one to see what it is.
Next, we'll set up the building storeys and floor plans.
05 Plantas del edificio y planos
Floor plans organise everything in BIM Online: clashes are numbered per level and the Clashlist is grouped by them. Before you run clash detection, open Building storeys & floor plans.
The storeys come from one of your IFC models. Choose which model to take them from – usually the architectural one. Then tick the storeys you need. Each ticked storey becomes a floor plan.
Each floor plan runs from a bottom level to a top level, taken from the storeys in the IFC. With the offsets you move those limits up or down. The cut plane sets the height at which the plan is cut – usually one and a half metres above the floor.
Need to see more or less of a level? Change its offsets here, and the floor plan follows at once. If you skip this dialog, BIM Online will ask you when you open the clash tools.
Pick a level from the dropdown to see its plan from above. Clashes show up as pins.
A floor plan has its own tools. The cube shows the plan as a 3D inspection view. Place Marker adds a clash by hand. And with the fire rating brush you click walls to give them a fire rating – Ctrl and the scroll wheel change the value. The eraser clears it again.
Choose All Levels to go back to 3D.
With the floor plans set up, the next step is to check the models, with the Checklist.
06 Revisar los modelos: la Checklist
Before you look for clashes, check whether the models contain the information a firestop solution needs. That's what the Checklist is for.
Every wall, floor and installation gets a row with a traffic light. Green is complete. Orange is worth a look. Red means required information is missing. The missing cells are coloured too.
In our usual process the checklist goes to the client first. Export it as a PDF from Save and Export. Per file and category it shows what's complete, so the modellers know what to improve.
When the improved models come back, import them again, and the checklist updates by itself.
Some information you can add yourself. Double-click a red cell and pick the right value. The traffic light turns green.
When the checklist is green, you're ready for clash detection.
07 Configurar y ejecutar la detección de clashes
Open Clash Detection. The first time you run it, an overview shows which categories take part. BIM Online sets sensible defaults based on your files, so you rarely need to change them.
Want to know exactly what counts as a clash? Click the info button. It explains the rules for walls, floors and openings, step by step.
When the models change, run detection again. Update keeps what you've already checked – marks, approvals and removed clashes – and adds what's new. Add only leaves every existing clash as it is. Replace starts over.
You can also run it for certain installation files only, and keep the existing clash numbers.
Click Run. On a big project this can take a few minutes, and you can cancel at any time. When it's done, every clash appears as a marker in the model and in the list.
Next, we'll review the clashes one by one.
08 Revisar los clashes
The Clash panel lists every clash, grouped by construction or by floor plan. Use the filters to narrow it down – for example, only floors, or only ducts.
Open a group and BIM Online cuts the model around that wall so you see just its clashes. Check each one. Tick it to approve – the marker turns green. Not a real clash? Remove it; you'll find it back under Removed.
BIM Online combines what belongs together: a pipe through a wall with three layers is one clash, not three. The badge shows how many elements were combined. Click it to see exactly what's inside, and separate an element if it shouldn't be there.
In 3D every clash has a sphere, an outline on both faces of the wall and a flag with its number. Right-click a clash for all its actions – including moving it within its wall.
Missing a clash? Use Place manual clash and click the spot. Working on an apartment building where only one apartment is modelled? Copy its clashes, then paste them in the other apartments – rotate with R, mirror with M – or paste them to several levels at once with To levels. Copied and manual clashes are kept when you run detection again.
You can also check the clashes on a floor plan. Pick a level: every clash is a pin. Click a pin to select that clash.
Once every clash is checked, the next step is to complete their information – in the Data Manager.
09 El Data Manager
The Data Manager is where you check and complete information in bulk. On the left are your tables.
You know the Checklist from the previous video. Here we look at the other tables, starting with the Clashlist.
The Clashlist is exactly what will be sent to Orange Button Office – every row is a clash. Click a row to find the clash in 3D, or switch to In view to see only the clashes you're looking at.
A red cell means a clash is still missing information. Double-click it, pick the right value, and the traffic light follows.
Use the toolbar to choose columns, add filters and group or sort. Grouping by installation type, for example, shows every type once. Fill in a group, and every clash in it follows. Like the result? Store it as a schedule of your own.
Number your clashes from the Number button. Choose a prefix and start number, limit it to certain levels or sections if you like, and run. Clashes and MSPs are numbered separately.
Press the i button for all keyboard shortcuts. And under Stored Sections you keep the section boxes you want to come back to.
In the next video, Engineering checks the space around your penetrations.
10 Engineering: distancias y MSP
Firestop products need space around them. Engineering measures that space for every wall and floor with penetrations. There are three distances. A: between penetrations. B: from a penetration to the edge of an opening or block. C: between services inside one opening or block. Set the required values in Settings – per construction type or installation type.
Click Measure distances. When it's done, every wall and floor with penetrations is listed per level. The red number shows how many problems each one has.
Open a wall to see where the problem is. Here two pipes are only 60 millimetres apart, where 100 is needed. There are two ways to fix it. Combine them into one MSP – a multi-service penetration, sealed as one block. Or move the penetrations further apart in the model.
The Engineering viewer shows each wall in detail. Front, side and top views with dimensions. The 3D model. And the floor plan. You can draw or adjust MSP boxes, measure, and leave comments. Then mark the wall as approved.
Approving an MSP numbers it and adds it to the Clashlist as one block. Openings that hold two or more clashes become an approved MSP automatically. Back in the 3D view, Place suggested MSPs does this for every wall at once. When you're done, export the engineering report: per level a plan, then one sheet per wall with all views, sizes and comments.
Next, we'll save the project and send the result to Orange Button Office.
11 Guardar, exportar, ayuda y cierre
Everything is saved through Save & Export. Save a draft to the server with Ctrl+S while you work; publish a version when it's ready for others.
Then send the result to Orange Button Office: upload the floor plans, then the Clashlist. Before uploading, BIM Online warns you if clashes are missing information needed to find a solution. You can still upload, but it's better to fix it first.
Need the clashes back in your BIM software? Export them as IFC – a full file you can re-import, or a quotation or engineering deliverable.
Stuck? Most panels have a video button with a short guide.
That's BIM Online: import, check, detect, complete, engineer and upload. In one more video, we look at how BIM Online works with BWIC openings.
12 Huecos previstos para instalaciones (BWIC)
In the UK, the openings for services are often designed before the firestops: builder's work in connection, or BWIC. When those openings are in the model, BIM Online puts them to work.
Open the Data Manager and choose Openings. Every opening in the model is listed, with its number, its shape and its size. The number is taken from the opening's own Mark.
To link them to the clashes, open Clash Detection and click Re-run. Under Clash settings, tick Data for Openings: an opening then gives its number and size to the clash it sits in.
Then choose Opening information only. Your clashes stay as they are; only the opening at each clash is looked up. BIM Online shows what it found before you apply it.
In the Clashlist, add the Opening Number and MSP columns. Where two or more services pass through the same opening, it becomes an MSP: a multi-service penetration, sealed as one block.
So the Clashlist shows at a glance which services pass through which opening.
Engineering uses the same openings. Its wall views show each opening with the services inside, so the firestop design matches the builder's work on site.
So the openings, the clashes and the firestops line up: one Clashlist that tells the builder, the installer and the firestop specialist the same thing.
In the UK, the Building Safety Act asks for a golden thread: for higher-risk buildings, every opening must be traceable from early design to the work on site. Orange Button covers that whole thread. The opening is designed and checked here, in BIM Online. Orange Button Office picks the certified firestop. And on site, the installer records it in the Field app, with a photo and a status.
Thanks for watching.
BIM Online
Vídeos cortos por panel
Un vídeo corto para cada panel de BIM Online, más un adelanto del Compliance Checker.
Qué hace BIM Online
- 01
Importa y prepara tus modelos
Arrastra todos tus archivos IFC a la vez. BIM Online deduce la disciplina de cada archivo por su nombre, así que un modelo de asesoramiento de resistencia al fuego se trata como información, no como paredes.
- Modelos de arquitectura, estructura e instalaciones juntos
- Crop project para ocultar elementos sueltos lejos del edificio
- Rayos X, caja de sección y filtro por categoría para ver el interior
- 02
La información que necesita un sellado
Cada elemento lleva sus parámetros de Orange Button: tipo y espesor de la construcción, resistencia al fuego, y tipo y tamaño de la instalación. BIM Online rellena lo que puede a partir del IFC; tú completas el resto.
- Valores que faltan, visibles de un vistazo
- Tipos elegidos de una lista, tamaños en milímetros
- Propiedades IFC originales en solo lectura
- 03
La Checklist
Antes de buscar clashes, cada pared, forjado e instalación recibe un semáforo. Envía la Checklist al modelador en PDF; cuando vuelven los modelos mejorados, se actualiza sola.
- Verde completo, naranja a revisar, rojo falta
- PDF por archivo y categoría
- Rellena tú mismo los valores que faltan
- 04
Detección de clashes por reglas
Los clashes se encuentran con reglas fijas para paredes, forjados y huecos previstos, y se numeran por plano. Una tubería que atraviesa una pared de tres capas es un clash, no tres.
- Plantas y planos a partir de tu IFC
- Vuelve a ejecutar tras cambios en el modelo: Update conserva tus comprobaciones
- Aprueba o elimina cada clash, o coloca uno a mano
- 05
Complétalo en bloque
El Data Manager muestra la Clashlist tal como llega a Office. Agrupa, filtra y rellena un grupo entero a la vez, y después numera tus clashes y MSP.
- Las celdas rojas indican información que falta
- Rellena un grupo y todos sus clashes se actualizan
- Numeración por planta, con tu propio prefijo
- 06
Engineering y el Compliance Checker
Los productos de sellado necesitan espacio. Engineering mide cada pared y forjado con pasos frente a las distancias que fijes, y te ayuda a resolver lo que no cabe.
- A entre pasos, B hasta el borde del hueco, C dentro de un hueco
- Combina pasos en un MSP o sepáralos
- Informe de Engineering: un plano por planta y una hoja por pared
- 07
A Office, y de vuelta a BIM
Guarda borradores mientras trabajas y publica una versión cuando esté lista. Sube los planos y la Clashlist a Orange Button Office, o exporta los clashes como IFC.
- Un aviso antes de subir clashes incompletos
- Exportación IFC para reimportar en tu software BIM
- Un vídeo guía en la mayoría de los paneles
Nuevo · Compliance Checker
Todas las distancias A, B y C, comprobadas automáticamente.
El Compliance Checker de OB BIM comprueba todas las distancias entre instalaciones y huecos de tu proyecto. En BIM Online lo encuentras en Engineering. Señala cada incumplimiento, te ayuda a resolverlo y genera un informe que puedes compartir.
- AEntre instalacionesDistancia mínima entre elementos, por tipo de elemento y categoría constructiva.
- BAl borde del huecoDistancia mínima de cada elemento al borde de un hueco o paso mixto.
- CDentro de un huecoDistancia mínima entre tipos de elemento dentro de un mismo hueco o MSP.
Define tus propias tablas de distancias por solución de sellado, ejecuta la comprobación en todos los clashes y exporta los incumplimientos por elemento constructivo en PDF.Ver el avance →
También disponible
¿Prefieres trabajar en Revit?
La Revit Edition lleva el mismo motor de clashes a Autodesk Revit, junto con las OneClick apps que eliminan el trabajo repetitivo del modelado de sellados cortafuego.
- AperturesComprueba y crea huecos para todas las instalaciones de una vez.
- Pasos mixtos (MSP)Agrupa instalaciones en un hueco según reglas ensayadas.
- NumberingNumera cada sellado de forma coherente.
- BatchLinkVincula varios modelos a la vez.
Revit Edition
Vídeos de la Revit Edition
Instala el plugin, vincula tus modelos y encuentra los clashes en Autodesk Revit, y descubre las OneClick apps que eliminan el trabajo repetitivo.
Preguntas
¿Qué es un clash de sellado cortafuego?
Un clash es un punto donde una instalación, como una tubería, un conducto o una bandeja portacables, atraviesa una pared o forjado de sectorización. Cada uno de esos pasos necesita un sellado cortafuego ensayado: una solución certificada.
¿Puede Orange Button buscar clashes contra huecos previstos?
Sí. Los huecos previstos (BWIC) del modelo participan en la detección de clashes. Cada paso a través de un hueco se identifica automáticamente y se analiza frente a los sistemas ensayados: tamaño y forma del hueco, distancia al borde y entre instalaciones. Un hueco con dos o más instalaciones se convierte en un paso mixto (MSP).
¿Cómo se cuentan los clashes?
Cada posición de clash única cuenta como un clash. Los primeros 200 de cada mes son gratis; a partir de ahí, el precio por clash baja a medida que crece tu volumen.
¿Necesito Autodesk Revit?
No. BIM Online funciona íntegramente en tu navegador. La Revit Edition está pensada para equipos que ya modelan en Revit y quieren las OneClick apps.
