Orange Button Office
Elk brandwerend project op één plek.
Office maakt van een clashlijst een gecertificeerd brandwerend ontwerp. Kies de fabrikanten waarmee je werkt, genereer een geteste brandwerende afdichting voor elke clash en volg het werk van offerte tot goedgekeurde afdichting op de bouwplaats, met of zonder BIM-model.

Office stelt voor, jij beslist
Voor elke clash zoekt Office de oplossing van jouw fabrikanten die voor die situatie is goedgekeurd, en laat zien waarom de andere niet passen.
Met of zonder model
Start met een clashlijst uit BIM Online of Revit, of met PDF-plattegronden en de doorvoeringen die op de bouwplaats zijn vastgelegd.
Bewijs voor je opdrachtgever
Een rapport van elke brandwerende afdichting in het gebouw, en een alleen-lezen link voor je opdrachtgever of de gebouweigenaar.

De oranje knop
Eén klik: een gecertificeerde oplossing voor elke doorvoering.
Upload een clashlijst en druk op Generate solutions. Office toetst elke clash aan de Field of Application van de geteste systemen van jouw fabrikanten en stelt voor wat past.
- Afgestemd op constructie, brandwerendheid, installatie, isolatie, sparing en maten
- Alleen de fabrikanten die jij kiest, je favorieten (met ster) eerst
- Past er niets? Dan zie je de oplossingen die net niet passen, met de uitsluitende eigenschap in rood
- Jij beslist: kies een andere oplossing en identieke clashes nemen die over
Videotour · Office
Van clashlijst tot goedgekeurde brandwerende afdichting.
Veertien korte video's: richt je bedrijf en fabrikanten in, genereer gecertificeerde oplossingen en volg het werk op de bouwplaats tot en met het rapport.
01Kennismaking met Orange Button Office
Lees het transcript
01 Kennismaking met Orange Button Office
Welcome to Orange Button Office. A firestop is only certified when it is installed exactly as its approval says. Office finds the solution that fits each penetration.
The firestop is the last trade on site, after the main contractor, the installer and the drywall specialist. So it has to be fast, and right first time. Even better: with good engineering you are involved earlier, in the design phase.
The dashboard shows at a glance how your projects are doing.
Under Projects you find all your projects, each in its own phase.
Open a project and you see its clashlist. For every penetration it shows which certified solution goes with it.
Solutions and Components hold the products of the manufacturers you work with.
And then Field activities. This is where the work from site comes in, until it's approved.
In the next videos we look at the settings and get Office ready to use.
02 Het dashboard en je weg vinden
After you sign in you land on the dashboard. At the top you first see your projects. Next to them is today's activity. Then your preferred solutions. And here you see how much of your licence you've used.
Below are your recent projects. The strip above them counts your projects per phase: checklist, quotation, engineering, construction and maintenance.
On the right is your company, with its users. Below it are your preferred manufacturers.
At the top of the screen, the bar shows how many clashes your licence has left. The bell shows new notifications.
And on the left is the menu. Hover over an icon to see its name.
Click Projects in the menu. Here all your projects are in one list, with their number, phase, city and how many clashlists they have. Click a phase to see only those projects. And click a project to open it.
In the next video you set up your company and your account.
03 Je bedrijf: instellingen en gebruikers
Before your first project, check your settings.
Under Personal settings you choose your language. You also choose which columns you see in a clashlist.
2FA protects your account. Keep your recovery codes somewhere safe.
The company settings decide which solutions Office can offer you. That depends on the countries you work in. And on the technical standards you use, such as European Technical Approval.
Here you also set the language of your reports. And you decide what viewers of a project are allowed to see.
On the right, Employees lists everyone in your company, with their role.
Under Users you invite your colleagues.
Click Invite new user and fill in your colleague's name and email address. They get an email to set up their account.
In the next video you choose the manufacturers you work with.
04 Oplossingen: je fabrikanten en favorieten
Office only proposes solutions from the manufacturers you choose. So the first thing to set up is Solutions.
Click Select manufacturers: you'll see the brands that are available for your country and your technical standards.
Pick the ones you work with and save.
Now every solution from those manufacturers is listed. Each one is a tested and certified way to seal one kind of penetration.
Its name says what it is: manufacturer, what passes through, the construction, the products and the shape of the opening. Filter on construction or installation to find what you need.
A star gives a manufacturer or a solution priority: that's how you set your preference. Click the star next to a manufacturer. Or click the star next to a single solution, for example the one your installers know best.
When more than one solution fits a clash, Office ranks them: a starred manufacturer comes first, and within that a starred solution. So a star on a manufacturer lifts all of its solutions. Filter on Preference to see your starred solutions.
The Usage column shows how often you've used a solution in your projects, and the document icon takes you to the manufacturer's own information about it.
Let's open one.
This solution seals a bundle of air-conditioning pipes. It goes in a solid wall. And the opening is round. The description is the text the manufacturer added to this solution, with the fire rating it is tested for – here up to 120 minutes.
Below are the components it's made of. You also see the countries where it's approved. On the right is the Revit object. Next to it, a 3D image of the finished seal. If an image is missing, the manufacturer hasn't made it available, so it won't appear in your report either.
In the next video you choose your manufacturers for Components too.
05 Componenten
Components are the products a solution is made of: sealants, foams, coated boards and collars. Choose your manufacturers here too – the list can differ from Solutions.
Each component has its code. Next to it is a short description. The globe takes you to the product page on the manufacturer's site.
Stars work the same as in Solutions: keep the products you use starred.
In the next video you start a project and see how it moves through its phases.
06 Een project, de fases en twee manieren van werken
Open a project. Every project has a number. It has a name. And it's in a phase.
In general, the phase follows your work. In the checklist phase you check that all the information is there. In the quotation phase you set the design and the cost. In engineering, Office picks the solutions. Then come construction and maintenance. When a project is finished, you archive it. Change the phase with this button.
The tabs below hold everything about the project. The first tab, Project, gives the overview: contacts and location, recent activity, and progress on site. On the right you also see who has access.
The people and companies you work with are under Contacts: the client, the main contractor, the installer. Link them to a project, and their details are on the project page.
To start a new project, click Add a new project and fill in its number, name, company, city and date.
Now, how do the penetrations get into your project? That depends on what you have. If there's a BIM model, the clashes come from the model – that's our first demo project.
If there's no model, you work from PDF floor plans and record the penetrations on site – that's the second.
We'll start with the BIM project: in the next video, its BIM tab.
07 Een BIM-project: het tabblad BIM
The BIM tab shows the model versions saved from BIM Online, with the number of clashes and elements in each.
Click Go To BIM to open the project in BIM Online, where you load the IFC files and find the clashes.
That has a video of its own; here we continue with what comes out of it: the clashlist.
08 Een BIM-project: clashlijsten en oplossingen
A clashlist is the list of every penetration in the project, with the information needed to seal it.
You upload it from BIM Online – or from Revit – and it appears here. The bar shows how many of the clashes already have a solution.
Below is the product selection. Each row is one clash: where it is, what passes through what, and the sizes. Filter any column to narrow the list.
Now for the orange button: click Generate solutions. Next, choose how Office looks for them: here, by the application areas of the solutions.
For every clash, Office looks for a solution from your manufacturers that is approved for that construction, fire rating, installation, insulation and opening, and for the sizes involved. No more searching through approvals and drawings by hand: quotations and designs are up to ten times faster. The distances that matter too – between services, to other openings and to the supports – are checked in BIM Online, under Engineering.
Click a solution to see exactly what it is. Where no solution fits, the row stays empty. Open the clash and look under Incompatible solutions: it lists the near misses and marks in red which property ruled each one out — often a single measurement.
Office proposes, you decide. Not happy with a choice? Pick another solution yourself. Clashes that are identical are grouped, so one choice covers the whole group at once.
Export the result to Excel to work with it yourself. Or export it as a file for other software.
In the next video you see the floor plans of a BIM project.
09 Een BIM-project: plattegronden
In a BIM project the floor plans come from BIM Online, one per level, with every clash marked on it.
Drag them into the order you want. You can also download any plan as an image.
These are the plans your installers see in the Field app.
In the next video you work without a model, from PDF floor plans.
10 Een traditioneel project: pdf-plattegronden
Not every project has a BIM model. In a traditional project you start from the drawings you have.
There's no clashlist here. Instead, open Floor plans. That's where you upload your PDF floor plans.
Put them in the right order. That's all Office needs: the penetrations themselves are recorded on site.
How that works with the Field app on site, you see in the next video.
11 Op de bouwplaats met de Field-app
On site, your installers use the Orange Button Field app. Before they go, they download the project, so it works without signal too.
They open a floor plan. Every marker is a penetration to seal.
Found a new one? Tap the plus and put it on the plan.
Then enter what passes through what: the construction, its fire rating, and the service.
The app proposes the solutions from your manufacturers that fit. Choose one, and confirm.
Once it's sealed, take a photo of it. Then set the status.
Back online? Press and hold the project, and tap Synchronize.
The work from site then appears in Office, under Field activities.
12 Field-activiteiten
Everything done on site comes together under Field activities – whether it started from a BIM model or from a PDF.
In a traditional project the activities are created on site; you see them here as Manual.
A basement or a stairwell rarely has reception. Work recorded without a signal stays on the phone and is uploaded as soon as it's back online, so nothing is lost.
Each activity has a status: new, scheduled, in progress, done, approved, not approved, damaged or maintenance. These are the standard statuses; you can adapt them to the way you work. Filter on status to see what still needs attention.
Open an activity to see all its details: the opening, the construction, the fire rating and the installation.
When the work is done, generate a report: proof for your client of every firestop in the building.
The report is built in the background, so you can carry on working. You get an email as soon as it's ready.
Open it from Documents. Every firestop in the building is in it: the construction, the installation, and the certified system with its products.
In the next video you keep documents with the project and share it.
13 Afbeeldingen, documenten en delen
Images and Documents keep everything that belongs to the project: the photos from site, drawings, and the reports you've generated.
Under Syncs you see every sync from the Field app: who worked offline, when they synchronised, and which activities were added or changed.
To work together, add colleagues under Users.
For your client or the building owner, use viewer mode. With it you create a read-only link. It shows the floor plans and the progress on site, without giving access to the rest of your project.
In the last video we look at your licences and where to find help.
14 Licenties, support en afsluiting
Click Licences in the menu. Here you see your Office licence. Above it is your clash balance. The clashes you upload come off your balance; the bar at the top shows what's left.
Under Apps you download the Field app for your installers.
Questions? Then click Support. Or watch the other videos in this series.
That's Orange Button Office: with a model or without, from penetration to solution to an approved firestop on site. Because every building is built twice: first in BIM, then for real. Thanks for watching.
Alles in Office
- 01
Dashboard
Je projecten per fase, de activiteit van vandaag, je voorkeursoplossingen en hoeveel van je licentie je al hebt gebruikt.
- 02
Oplossingen en componenten
Kies je fabrikanten voor jouw land en technische normen. Geef een fabrikant of oplossing een ster om je voorkeur aan te geven; bij elke oplossing horen componenten, een Revit-object en een 3D-afbeelding.
- 03
Projecten en fases
Elk project doorloopt de fases checklist en offerte, engineering, bouw en onderhoud, met contactpersonen en toegangsrechten.
- 04
Clashlijsten en oplossingen
Genereer met één klik oplossingen voor een hele clashlijst, afgestemd op constructie, brandwerendheid, installatie, isolatie, sparing en maten. Identieke clashes worden gegroepeerd en je exporteert alles naar Excel.
- 05
Plattegronden
Eén plattegrond per verdieping uit BIM Online, met elke clash gemarkeerd, of je eigen PDF-plattegronden voor een project zonder model.
- 06
Field activities en rapporten
Alles wat op de bouwplaats gebeurt, komt hier samen, met de status van New tot Approved. Genereer een rapport van alle brandwerende afdichtingen in het gebouw.
- 07
Afbeeldingen, documenten en synchronisaties
Foto's van de bouwplaats, tekeningen en rapporten bewaard bij het project, plus een logboek van elke synchronisatie vanuit de Field-app.
- 08
Bedrijf, gebruikers en delen
Nodig je collega's uit, beveilig accounts met 2FA, stel de taal van je rapporten in en deel een alleen-lezen viewerlink.
Vragen
Waar komt de clashlijst vandaan?
Uit Orange Button BIM: BIM Online of de Revit Edition. Geen BIM-model? Dan heb je geen clashlijst nodig: upload je PDF-plattegronden in Office en je monteurs leggen elke doorvoering op de bouwplaats vast met de Field-app.
Kan ik Office gebruiken zonder BIM-model?
Ja. Maak een project aan, upload je PDF-plattegronden en zet ze op volgorde. De doorvoeringen worden op de bouwplaats vastgelegd in de Field-app, die de oplossingen van jouw fabrikanten voorstelt. Alles komt samen in Office, tot en met het rapport met elke brandwerende afdichting.
Welke fabrikanten zijn beschikbaar?
Office bevat de fabrikanten die zich bij het platform hebben aangesloten. Staat jouw favoriete fabrikant er niet bij? Laat het ons weten, dan nemen we contact met hen op.
Kan ik met mijn hele team werken?
Ja. De Office-licentie is per gebruiker, dus je kunt iedereen uitnodigen die aan je projecten werkt.
